FlexiSpot EC1 Standing Desk Installation Guide

Installing a Flexispot isn't rocket science, but it does require some attention to detail. That’s why we've created this Installation Guide video so you never have to worry about a thing.

[Its-R]

Anyone else confused with the bottom two holes not being there?

[dominiquecruz]

Thanks so much for this! It’s easier for me to follow this while also reading the printed instructions given.

[shaylaster]

Step 7 is not clear- which holes do I use

[edoardo-tag]

What should be the lenght of the crossbeam for a 160cm lenght table top?

[alexandralevine]

In step 2, it’s not clear how long I should extend the crossbar or if I should re-tighten the screws before flipping over to attach in step 3. Please advise

[aikothing]

Is the turning stick knob supposed to screw all the way back down? Mine won’t

[girogio]

Are you selling the desk top with holes in it? Or do I have to make them myself?

[vttfucn]

Anyone missing the last predrilled hole for the keypad? I only have a line of holes for the first screw of the keypad on the side with the motor

[HarshmeetSingh]

what are your motor specs for this table ??

[Mkolar]

Step 6 and 7 need to be switched in the guide. Your video has them in the proper order but now, like many, it’s improperly built with a rod bar unable to attach.

[aniln]

For EC1 step 6: do we need drill holes to cross bar as we don't see them ?

[sebastienroy]

Hey,

Step 6 Install Adapter Holder : It's written to attach holder (9) to crossbar (6). How should we totally fix it ? No screw in that step guide. I would have finished except that (step 13), but that part is still loose now, is it normal ?

[EmilyKrawczak]

I set mine up, but it won’t raise or lower. I hear the buttons click, but no movement

[jacquelineibarra]

One of the leg holes wasn’t threaded, so frustrating 🤬

[Kjsprime]

This thing is making me so mad right now 😡

[anthonym]

0:44 how to install the adapter holder? It doesn’t say which screws to use

[shannmuka]

can we set-up the entire desk from start to end with the equipment provided with the actual desk?

[cherryhall]

Any idea why 1 side lifts up, but not the other. It remains still.

[hannahgrace]

Hey FlexiSpot, I understand the saving costs of producing an adjustable frame, but a lack of holes in the desktop and the perplexingly broad instructions create bottlenecks for those having to actually put it together. Do better for your consumers please.

[FORRUNNRS]

The print instructions are way confusing. This video helps but still could go into a little more detail on saying that the crossbar should stay loose and to adjust it later on. As well as show the holes that are on the table. Had to unscrew and rescrew a few times cuz I had stuff wrong.