Culligan Water Filter - Review and Change Filter Cartridge

preview_player
Показать описание

One part of our whole house water filter system is the Culligan 10" x 4.5" water filter. I actually have two of them installed in line after the iSpring filters. These filters remove mainly rust from the well water coming into our house. I change them once a month.
This video is my opinion of the Culligan filters and the process for changing the filter cartridge and the steps involved.

Disclosure Note: The above links are Amazon Affiliate links. There is NO additional cost to you, however I get paid a small percentage from Amazon if you purchase after clicking on the link.

culligan water filter, water filter review, best water filter, whole house water filter, dupont water filter
Рекомендации по теме
Комментарии
Автор

Bro I never had a problem like you at removing the filter. You're tightening them way to tight, you only hand tighten the filter then with a quarter turn or so to snug it up with the wrench. Over tightening the filter will cause you to have issue's with the o-ring such as you see in this video, I've been using the same o-ring for over five years with no leaks or deformities. It is a good idea to have a spare o-ring on hand encase you do have issue's. The grease that you use is a silicon grease, you pick it up in the pluming section of a hardware store of your choice.

garyyoung
Автор

Really appreciate you showing EVERYTHING and going back to add additional clarifying comments. This video and your longer video showing the entire job helped me greatly.

billyk
Автор

I inherited the Culligan 360. After watching various videos on water filter replacement, it seems that many systems work in a similar way. Watching your video, I noticed that you shut off the water to the house and also said something about the "bypass." For newcomers to water filter replacement, it would be so helpful if you explained what a bypass is, what it does. More women than men now own their own homes. I've been in that club for 20 years but water filtration is new to me. Help! Before you said, "Okay, the water is back on, " I think you also switched the bypass back on without mentioning it?? I love learning more about doing my own home improvement but I am aware of my limitations. Changing a water filtr does not scare me if I have clear instructions. You are good at this YouTube stuff. Just verbalize every step. Talk to women, too. We learn fast. Thank you so much!

jackierostow
Автор

I love that you put time stamps. Thank you!

CraigTheWriterStewart
Автор

Hey, the filter has bypass. You don't need to turn all of valves off. Just turn water filter top blue handle to close direction. Then bush the red button to release the pressure. next is to take body off. Without bypass of filter, its much cheaper. I find menards sell the most lower price of water filter at $58 with bypass and clear body.

jzheng
Автор

Thanks so much! This helped out so much and I installed my culligan system today with no problem. I really appreciate the help.

peterdavis
Автор

Never cease to amaze! Always informative!!!👍🏾

GoaWaySanity
Автор

I have a 1 Colligan filter WH-HD200-C going to add another1 next to it . I am on well . use same filters you have. Thanks great job

frankletizia
Автор

Hey, I really like your setup. I'm in the works to switch over to something like it. I was wondering where you buy the Culligan filters from in bulk? I know this video is from 2019, so things have probably changed but figured it didn't hurt to ask.

justthatjoeguy
Автор

I am using two of these to replace my ap917 and ap910 filters, the 5 micron filters are 300 a pair and last a few months. these you have are much cheaper and you can monitor the dirt from the clear base. thanks...

Thessx
Автор

Where is the 20-micron filter? Can't find it in your links?

ms.crystal
Автор

Should I have two or one would’ve been enough thanks great video

truthseeker
Автор

Good work.. If you want to add Osmosis filter, where you install? I will try do same in my house in Panamá.

JaraPTY
Автор

Which one is better or work best on water softener. Instant or storage geyser

swapsakpal
Автор

I just installed one myself. Magnesium in our well. I have a soft water tank. But the well water is really bad. So I put a filter. Pre-. filter to house. The diverted Handel a pain. But I put TriFlow on the diverted. Turns much easier. Then I don't do anything. Unless I have Triflow.

bigsidable
Автор

Thanks for the instructional video. It helped.

richardkennedy
Автор

Can I get a list of parts you used to set up this system?

dalemckenzie
Автор

That's not a bypass valve on the tops of the filter housing where the blow off valve is? And if you shut off the side where water comes in but not the house side and crack open a faucet it will relieve the pressure making the filter housing easier to open.

gregoriodecker
Автор

What about the battery it takes . How often you got change it? You know cost of 1?

allenletizia
Автор

Make sure to get a brand so that generic filters work so that you can buy in bulk and save money

UKsystems