Creality Ender 3 V3 SE Ceramic Hot End Install

Even though there is a hold up on the FULL UPGRADE Install on the Ender 3 V3 SE. We have the Full Install Instruction and SIMPLE CR Touch Reposition Instructions

#3dprinting
#creality3d
#ender3v3
#ender3v3se
#ender3v3ke

[mdeshon]

Cheers. I just opened the ke hot end I got in the mail not 30 minutes ago and I’m casually printing a 6mm car touch spacer as I saw you uploaded this. Thank you.
I’m still waiting on 2 remaining additions to come.
Be interesting to see how your linear rail project is doing.

[Necronekoko]

Thank you very much for the tutorial, I was successful in my hotend swap because of it.

[Butrdtostngravy]

Whelp. I did something wrong 😂I put the two nuts in and thought the BL-Touch looked a BIT too close... Should have trusted my instinct 😅punched a hole through my build plate.
Didn't follow the directions exactly so I don't blame you lol

[aimanramizu]

Wow really amazing how we can just upgrade it like that. Might look into this vid in the future once I learn more on 3D printing. One question is. How do we now get cooling to the new hotend. Do we need to create and design a new fan shroud and duct?

[Gamboa]

awsome upgrade, nice video! but with the ptfe tube we can still only reach like 240-250ºC even puting capricorn instead we could gain just a couple degrees, what u think?

[dprintingnerd]

Do i need to do that to the cr touch or can it go back on the way it was?

[magicdragon]

I came across this video and ordered the parts right away. My old hotend got swallowed up by a big glob of filament. I've since done the upgrade but sometimes get adhesion issues, first layer or a few layers in it will start to either lift a little or leave raised filament which gets caught by the nozzle later on and knocks the print loose. Any ideas? I've used cr touch to level the bed a few times and the issue doesn't happen on every print e.g benchy prints just fine. My next step is going to be a brand new spool of filament just to rule out that being the problem.

[kyfilms]

1:35 Is it mandatory to apply this and what are the issues with not using it? I am currently preparing to upgrade to the CHC PRO hotend.

[matthewbriggs]

I am stuck trying to remove the tension screw. I can see the hole but not a head of a screw. The image of the tension screw on screen was not high enough resolution to me to make out. Is there a video that shows this more clearly?

[fpvfish]

Did you buy and plug it without problem or did you soldering it to be longer?

[zaik]

Hey man i had justvordered fans for a dual fan setbup but seeing as how this lowers the nozzle 5mmish will i have to fond a way to lower the fan ducts or should still cool good with it?
My parts come friday and i want to be ready

[Daizlol]

I did some thinking (and looking) and saw that the hotend design for the SE is nearly identical to the Ender 5 S1 (barring the different shape in the heat sink). By extension, could this mod be possible on the S1?

[benscott]

I put a Spider speedy hot end on my Ender 3 pro with a CR touch. The spacer idea is great. Mine seems to be right at a 0 nozzle offset but a little play would be nice. Thx for the video.

[geromemercs]

hi are you able to put up the whole 300C heat without modding the os or firmware ?

[Daizlol]

Quick question, how’d you get the entire head off of the gantry?

[punkreeperful]

The 2 screws connecting the heating element and heatsink can it function properly without those?

[GameCiio]

What kind of Fan Mount are you using for this hotend?

[chihchen]

Great Video... What is the benefit of going with a Ceramic Hot End? And can you provide the link where you order it from? Thx

[scottforsyth]

I'm having trouble removing the two tiny bolts or scres holder the SE hot end on IK tried like 29 allen keys non e of them seem to fit or work? Does the K1 hot end need those 2 little screw ort bolts OI was thinking about cutting mine off with mydremel?

[jiachangchan]

Is that hotend come with the BiMetal heatbreak