BMW E36 325i Raw Intake Sound

preview_player
Показать описание
Installed a short ram open pod filter into my E36 325i Manual. The induction noise when WOT is significantly louder and it is a pleasure to drive with it. The engine is a M52B25 with M50 manifold. Exhaust is stock factory.

Instagram: @mengsuan88
Рекомендации по теме
Комментарии
Автор

Nice one bro, but you need to fab an enclosure, so that you avoid sucking in hot air..even a simple aluminium plate bent into a shape of a box with an open top...will help you loads

poovaneswaransupramaniam
Автор

I drilled out my high beam on my e36 and cut a pvc pipe to fit into it, added a screen in the back end to prevent and debris getting sucked in also installed a mishimoto intake boot and powerstack filter with a extension to get it further away from motor and closer to custom headlight air duct

forgingaerospace
Автор

it sounds terrific 👌 but you need to insrall a flexible rubber tube to extend the intake so the filter is collecting cold air and so it doesnt lose power, if the tube is not long enough it loses power, maybe try putting back the part of the airbox that drives the cold air into the engine bay so it directs the air towards the air filter

michaeldaude
Автор

Just found your channel. Beautiful sound. Great job on your mods. Drive safe brother. Greetings from klang.

skylineisking
Автор

This is how a BMW should sound like. Those exhaust rattle fanboys are no better than Honda ricers... This is pure engine sound. Quiet when off gas, melodic when on... Just keep in mind, as long as you don't get it remapped, this will be slightly slower than factory. It messes up the Fuel Air Ratio. But a proper remap from a shop, not a friend. Then it will be even faster!

fromthegods
Автор

Nice sound! It as loud as mod exhaust sound.

rexyong-
Автор

Thanks for this im planning on saving an e36 m3 so now i know ill probably never sell it if i modify it

bobross
Автор

Well dude your the coolest dude on YouTube. Thanks for the vid

exoticmotorsports
Автор

Sounds great!😍Would i see more drifting video🌚I like cars going sideways 😍

PuteraMariff
Автор

hi bro then wwhere's the airmass floww

bobbysuryadilaga
Автор

extend the pipe more to get colder air under the bumper

NA_NA
Автор

I just want to put a m50 intake manifold with a good cone filter setup on my 328ci e46, i hope it sounds half of this goddess...

agdwhite
Автор

Did you experience any idling problems when you installed the intake filter?

raymondred
Автор

I wanna change my cold air intake also :)

lwkoon
Автор

Is the whining noise at idle the alternator?

BrokenBMW
Автор

ada hari rasa nak jual e36 manual 2.0 aku tp bila tgk video2 mcm nie terus tak jadi nak jual.

farizalkamarudin
Автор

i nak tanya..bole jadi ke intake longgar..i tak boleh tarik rpm sampai 3500 setiap gear? im new with e36 🙏

hairiezulkifli
Автор

I believe your car is a 323i since it's on M52B25. Not the 325i. There's a difference as the 325i comes with the cast-iron engine block and only the M50B25 engines. Whereas, the 323i comes with the updated and newer aluminium engine block. You should take note of your terms in the video, otherwise it'll cause confusion towards your audience. However your driving's good, love how the M52 pulls.

shaunjt
Автор

dude go ebay and buy a cold air intake, you can find them for $60 usd

emmanuel
Автор

Il filtro aperto sul 6 cilindri aspiato ai porci

luboltz