Cantilever Beam With Point Load At Free End

Cantilever Beam With Point Load At Free End
Lecture By: Er. Himanshu Vasishta, Tutorials Point India Private Limited

[myfavouritemovies]

Sir the shear force should be positive because for right side of section downward forces are positive.

[dnyaneshwarwarwade]

SFD should be positive. This is not by mistake presentor has written. Don't make videos if you are not clear. Because we student keep faith on teacher & consider it in wrong way.

[amitkumar-gpnt]

Sfd must be in positive side.. Its wrong sfd diagram.. Please make correction of that

[naishinlungpanmei]

Sir solve this for me.... A cantilever of 4 m span and 400 mm depth carried a uniformly distributed load of 5kN / m . Find the value of the concentrated load w acting at the free end so that the maximum deflection does not exceed 10 mm anywhere in the cantilever. Also find the maximum slope due to both these loads. [E=200GN/m^ 2 ; I = 20000 * 10 ^ 4 * m * m ^ 4 .) 10

[KonadaBhanumati-iyow]

Is that, I think the shear load is +ve due to right downward 🧐...

[harsimranvirdi]

Sir shear force should be positive as taken sign convention

[AncientWisdom]

Would a 12 inch cantilever have more load bearing capacity as compared to 9 inch cantilever if the area connected to the wall is the same in both cases. I am talking about wash basin brackets which are riveted to the wall.

[albertjoseph]

Shear force is in upward axis is it correct sir ?

[pheubuselectric]

Sir ke saamne camera ke left me kisi ne textbook pakdi hui hai, ye saara wahi se copy maarta hai Bina kuch soche samjhe, khasker ki numerical me

[udaypuramsrikant]

Sir how to find the which cross section is suitable for particular loads

[aman]

Galat padha raha hai ye SF positive hogi