How to Scribe in 60 Seconds

preview_player
Показать описание
How to scribe. Scribing is easy, and is professional.
Рекомендации по теме
Комментарии
Автор

Make sure the front of your piece is level before you scribe, or you may end up with perfectly scribed, out of level piece

dtg
Автор

Pretty good tip although i will say that most people wont do all that and theyll just use caulking

timothydu
Автор

You could also add a small board so you don't have to come off the wall multiple times then just make the additional deduction

dee-rjyj
Автор

You could also use a washer and pencil and it does the same thing, and I think it's better.

ryangullstrand
Автор

Thanks for the 45 degree angle tip... have to do something intricate on a 45 and that will make it possible.

drewlimelight
Автор

For all of you saying washer, you just be scribing multiple times. On top of that a washer doesn’t have a point like a compass. If you done enough scrubbing you’ll know

brandongomez
Автор

Could of went a little tighter for sure.

tonycastle
Автор

Nice, also a nice 5degree bevel on the back will help sit flush the the corn too

RickFlairWoo
Автор

This one's a straight line, measure the top and bottom and draw the line between them. scribing is more important if there are jigs and jags in the middle. i'd rip it with a skilsaw not jigsaw

Stephenwc
Автор

Suggest plumbing the board b4 scribing .

georgelutz
Автор

What about the trim that infills between built ins and the wall?

SamElliottStudio
Автор

Now, how do you cute a straight line with a jigsaw? 😭

seheabol
Автор

Bro can I ask your advice on something?

allehman
Автор

"It fits... LAikE a GLoVe!~"

kay
Автор

what if you need it to be an exact measurement, wouldnt the scrib cut it down?

killazDC
Автор

Washer instead. Way more accurate and faster

rwilson
Автор

Washer is a thousand times faster and usually more accurate

tintshady
Автор

Nice job buddy 💪👍

Not a lot of people know how to do it 😂

Przehuj
Автор

NO so easy for more curvey details. Try fancy curvy baseboard for example.

AncoraImparoPiper
Автор

Not a good tutorial. You did mention setting the piece plum before scribing and you didn’t back cut the scribe line. Then, your fit wasn’t tight. 🙄🙄🙄🙄

joeblow