filmov
tv
Fire alarms hacked to play mario brothers theme
Показать описание
This is a simple hack to a fire alarm to make it play pretty much anything you want.
One of these fire alarms use a speaker (similar to a speaker that you would find in the earpiece of an old rotary phone), the other uses a massively large 2" piezoelectric disc (I've never seen one that large).
If you simply follow the positive lead on the speaker or piezo element, it will lead you to a transistor that is driving the speaker. On both these units, the base of the transistor (use the datasheet for the transistor to find out which one is the base) is tied to a resistor, which then leads to an IC. The IC outputs a square wave signal to make the fire alarm sound.
On both these units, I cut the link between the IC and the resistor. I then tied a microprocessor (in this case, an Arduino atmega328) right to the resistor. I made the assumption that the resistor value to the transistor was good, since both ICs on each board output a signal at 5 volts. I also assumed that if it was good enough for the circuit's IC, then it's good enough for mine.
So if you want the code, go there. This is a simple project that anyone could do.
One of these fire alarms use a speaker (similar to a speaker that you would find in the earpiece of an old rotary phone), the other uses a massively large 2" piezoelectric disc (I've never seen one that large).
If you simply follow the positive lead on the speaker or piezo element, it will lead you to a transistor that is driving the speaker. On both these units, the base of the transistor (use the datasheet for the transistor to find out which one is the base) is tied to a resistor, which then leads to an IC. The IC outputs a square wave signal to make the fire alarm sound.
On both these units, I cut the link between the IC and the resistor. I then tied a microprocessor (in this case, an Arduino atmega328) right to the resistor. I made the assumption that the resistor value to the transistor was good, since both ICs on each board output a signal at 5 volts. I also assumed that if it was good enough for the circuit's IC, then it's good enough for mine.
So if you want the code, go there. This is a simple project that anyone could do.
0:01:45
Fire alarms hacked to play mario brothers theme
0:01:45
Musical Fire Alarm Hack - Super Mario Bros - Arduino
0:01:01
Playing Fire Alarm From Speaker In Class Prank #shorts
0:00:13
Pulling fire alarms for fun
0:00:27
Can you get Away with Pulling a Fire alarm? (DO NOT TRY) #shorts
0:00:52
School fire alarm vs tornado alarm…….
0:00:17
Smoke Alarm testing #shorts
0:00:15
Smoke Detector Test | Fire Alarm | Smoke Management System
0:00:17
𝙄𝙈𝙋𝙊𝙎𝙎𝙄𝘽𝙇𝙀 ⚙️🇧🇷 #emperorgaming#shorts#foryou#shortsfeed#foryoupage#viralshorts#trending...
0:00:29
What if you PULL Firealarm at Mall?
0:00:40
New action hack the fire alarm The Presentation Experience
0:00:29
Pulling Fire Alarm Prank💀 via:@AshAlkk #ashalk #shorts
0:00:12
I Played A Fire Alarm Sound While My Brother Was Using His VR Set, And This Happened.. #shorts
0:00:13
Fire alarm manual call point activation with sounder and beacon
0:00:23
pulling the fire alarm in school #shorts #roblox #brookhaven #funny #firealarm #53
0:00:22
Hacking the Fire Alarm in a School Presentation on Roblox
0:00:20
I bought an air raid siren. #shorts
0:00:18
This Alarm System Is Must Have For Schools
0:00:07
If I hear your smoke detector its over 
0:00:10
Pulling the Fire Alarm to see if this helps
0:00:15
Star Trek Fire Alarm? Red Alert! | #shorts
0:01:00
I Pulled the Firealarm at Walmart… #shorts
0:00:58
Dog Sets Off SMOKE ALARM! #fire #funny
0:00:17
Top 3 🃏 Hacking Apps in ▶️ Play Store 😍 #hacking #anonymous
Комментарии