MOVIDRIVE® B Training Session 7 - Troubleshooting

The seventh and last session of this training course goes over the ten common faults that we get support questions about with the MOVIDRIVE® and motor driven applications. These faults are F01, F03, F08, F14, F28, F31, F42, F44, F93, and F95. We will mention common causes for these and what diagnostic measures can be used to help find the root cause of the fault. In this session, we also review the settings of the Scope tool that will be essential to use when diagnosing faults. We conclude this session by discussing the settings for the Scope DataLogger tool, which can automatically upload the Scope recordings to the computer when you are not near the application.

For questions or support outside the United States, please visit:

During this troubleshooting session, several previous videos from this training series are mentioned to review for further instruction and demonstration. Here are links to those videos.

Video Chapters:

00:00 - General Diagnostic Guidelines
10:28 - F01 & F03 Fault
16:09 - F08 & F42 Fault
20:58 - F14 Fault
23:53 - F28 Fault
25:29 - F31 Fault
27:25 - F44 Fault
29:55 - F93 & F95 Fault
32:32 - Scope Settings
40:41 - Scope DataLogger Settings
49:09 - USA Technical Support
50:15 - Worldwide Technical Support
51:13 - Concluding Comments

[elmerpangilinan]

We have 5 Inverter Modules SEW with model: MM07D-503-00 and need to determine their individual status if still OK or NOT OK. Can you help me to determine? I need a procedure

[iancastro]

HI MY MOVITRAC INVERTER WAS H1 LIGHT INDICATOR ON .ILL ALREADY CHANGE ALL CABLES BUT STILL THE SAME ISSUE.ANY SUGESTION ? THANK YOU

[asharsaeed]

I have an MC071B drive, Which I've been trying to learn how to control work on my own so I'm stuck in a 24 V operation state I don't know how I can change the operation state, So I need your help and last but not least Can you provide me with any training regarding this.

[jkavillan]

Hi sir, I have an error F122, " Absolute Encoder Option" . Suberror 16640. So due to this error i could not jog the lifter down by using manual operation in movitools. I need to jog it down so i have access to replace the external encoder. Please advise and thank you in advance.

[ionutpiglesan]

Hello . We have a broken power module MDX60A0750-503-4-00 SACH NR 8226644
NR 0235016
F 0..180HZ on a MDV60A0750-503-4-00 control unit.
We put a new power module MDX60A0750-503-4-00
P# 08226644
S# 31.6181737301.0002.24
F 0...599HZ
When we power the power module, before starting the motor, we get an instant F01 overcurrent .
Is there anything we can do?
Thankyou.

[NGUYENTUANDKC]

hi mr, i have problem with F14 code 27, can you share me the way to trouble it!

[-Automations]

hi. thanks for your video. i need to solution for f09 error cod ("wrong operating mode selecting"

[kerlinjoelespinozavaldizan]

Hola podrian enviara el link del manual completo para poder usar, quiero resetear a fabrica y no puedo

[Ken-lrpd]

Hi I have fault f-28 how can I fix this

[karimtech]

Fault number 2 how to operate Automode