FPORT SETUP (JUMPER R1F RECEIVER!)

FPort Setup (JUMPER R1F RECEIVER) / FPort telemetry setup simplified! FPort not working? Here's how to setup your FPort protocol telemetry receiver to include wiring diagram with flight controller, binding your FPort receiver (demo with Jumper R1F receiver) with your transmitter (demonstration with Jumper T16 transmitter), complete Betaflight FPort setup, and getting FPort telemetry working in your transmitter. Free FPort Setup checklist is available through link below.

RESOURCES & LINKS MENTIONED IN THIS VIDEO:

_______
TABLE OF CONTENTS
0:00 Intro
1:31 R1F Physical Characteristics
2:15 FPort Flight Controller Requirements
6:31 FPort Receiver Flight to Controller Connection
7:00 Bind R1F Receiver
8:49 FPort Betaflight Setup
11:04 Telemetry in Tranmistter
_______
PRODUCT LINKS

👉Jumper T12 Pro Hall, OpenTX, Internal Module (little brother to T16!):

_______

TMAC FPV PLAYLISTS

"OpenTX"

_______

SAY HI & SUPPORT FUTURE FPV FUN!

Note:
This description contains affiliate links which allow you to conveniently find and purchase the items mentioned in this video at no additional cost to you. When you use them to make ANY purchase (not just the linked product) it enables TMac FPV to earn small fees which help support your TMac FPV channel. They are here for your convenience, there is no additional cost to you for using them, and you are not obligated at all to use them. Thanks for your support!

#fport, #jumperrc, #tmacfpv

[TMacFPV]

Are you FPort ready? Let me know if you'll be using FPort in the comments below and make sure to check out my site at TMacFPV.com !😀👍

[menhirbell]

Thanks lot for your video! helped me a lot .. two full days fighting with betaflight and binding million times.. thank you

[power-max]

Thank you for this video! Is there an uninvert hack for the Jumper R1F receiver? It has quite a few SOT23-5 packages, one of which I burned up and had to replace, which was an inverted tri-state buffer (I forgot the exact part number)

I have a Mamba F405 receiver and I can't find a special S.port on it, out of ALL the pins it breaks out, none of them appear to be

I have not found any documented way to do this, so I might give it a shot, but it might require replacing such chips with noninverted equivalents.

[markjohnson]

I truly appreciate your work Tmac. Thanks!

[joevo]

Thanks for the guide! Appreciate it. Clear and easy :)

[samavella]

TMac,
Great video. I love your explanation on the F4 flight controller. Now I know why I could not get the R1F working on my iFlight Cinebee.

Also, I finally got my R1 working on my Beta85X 4K. After all that time, through the BETAFPV user group I found out that f.port doesn’t seem to like TX3. When I moved the f.port to TX1 and did Salk of the rest of the magic by setting up a softserial and so forth, I got all of the telemetry that you can possibly have. Now even my LUA scripts work.

Have a fantastic weekend!

Cheers,
Sam

[espenchristensen]

Thank you Tmac, everything is so much easier with all your help, downloads plans videos and education. great...😎

[Sackenstein]

Great video TMac. I dont think I'm fport ready but do appreciate the video. I hope all is well. Thanks

[gursoyakar]

hi, you will face these problems with jumper t lite controller and jumper r1f receivers. browser browser receiver, betaflight CLI set serial_halfduplex ON
set serialrx_inverted = ON as . but it is not active, the engines are not running. what could be the problem?

[MtnCommando]

Hi TMac,

Any idea on effective range? The product specs say > 2km. Is this really true (or even close)? At $20 a piece, I'd be tempted to use a couple of these in my giant scale gasser (with powerbox for servo power). Thoughts?

[RadikalBanal]

help!

telemetry works fine, but betaflight doesnt show any reactions when i use the controller sticks

[ominguti]

Yes, very nice... if only it worked on my taranis X9 lite :-( I'm getting RC receiver inputs, but NO telemetry. I had to upgrade my R1F to latest firmware (2.1) because my transmitter is on 2.1.6.

[thatone_daniel]

😀Great content!! I saw your comment on Sunny Lenarduzzis video and decided to stop by you have awesome videos!! #keepthemcoming

[maxartfpvperufilmacionesya]

Help please its normal tu have continuity betweem the signal pad and negative in the r1f jumper receptor or its a problem....thanks for the video Ill be waiting for your answer thanksss

[charlesdmckinley]

Hey man thank you so much brotha!!! You are the Man!#!

[sklote]

I Knew you would get to this Sonner or later Thanks TMac !!!

[rchobbyer]

I have a iFlight SucceX-E F7 FC Stack. I can connect the receiver to SBUS ? I have a jumper t lite, it will work? Thanks

[randyck]

From the documentation of my HGLRC F4 mini fc looks like tx1 is set up for s.port. This coming week end I'll find out for sure .

[XavierOrrit]

He upgraded my taranis x9 lite to Access 2.1 protocol and now I can't bind the Jumper R1 + receiver, I can't upgrade the receiver to 2.1 either. I have tried different firmwares of the xsr receiver and it does not work. Because I understand that for the receiver to bind, the radio and the receiver must have the same firmware version, right?

Thank you

[ChrisParayno]

Dang, so I can't run this on my larva x hd?