Breville Dual Boiler BES920 service menu, error codes, cup counter, clearing Descale message

[peterrietdyk]

Thank very much. Your video was more instructive and helpful than Breville’s own videos.

[hilbu]

This is the most helpful BDB video on youtube. Thank you!

[Bikerman]

THANK YOU! Saved my sanity after doing a

[thomassmith]

Hey, could you do a video on the manual descale. I've been avoiding doing the descale cycle for a while and I'm getting worried!

[JennVisser-dytl]

Hello!! This video is VERY helpful! I have it saved as a reference point for future. I noticed when you unplugged your Breville and ran that part to check all the boilers yours said H HH. Mine says H HL. Any chance you know what the difference is? I have tried researching and come up short of answers. Thanks so much!

[unclebob]

TIL my coffee machine has made 7800 shots

[jeffreywall]

Long time BES920 owner (on my 3rd) and all 3 have what I call the 'post nasal drip syndrome' whereby the hot water outlet (not the steam wand) drips / leaks during shot extraction, especially under high(er) pressure (~ 9+ bar) I finally begged a VP at Breville to send me the hot water valve (actually the 'needle valve') which in the end, they were so kind as to let me purchase one for $30.00 USD (Part # SP0014213) After replacing it the PNDS stopped....for a few months, only to return like clock work. I have surmised the issue to be with the o-rings themselves and not the actual valve component. I basically need $.02 parts to fix a $30.00 issue on a $1, 300.00 machine. Any idea where I could obtain replacement o-rings for the SP0014213 needle valves?

[johnkraay]

You mentioned not to use the machines descaling feature. How do you manually descale this machine?

[TheMrLayer]

Thank you very much. Are the three NTCs (Red Blue and Black connector on PCB) the same Part, or these are different NTCs/Thermostats?

[joeg]

Hi. I have Sage dual boiler, but not work last menu. When I do it like you, mine display is without light and show something, like C, second thime 3 or 8, (not remember), and when pressing other buttons not react... On power buton return to normal. Is that some other combination for that menu or what?
Thanks.

[Jack]

Thanks for the video, mine doesn’t go higher than 67 degrees! Any tips ? 🙏🙏🙏

[space.youtube]

Out of curiosity, what was wrong with the machines you had that produced the "08" error code?
And how did you fix it?

[ahsanhabib]

Hey there. I routinely make 4 double shots back to back every morning. Then I do a back flush using the single basket with gray rubber cover. I manually press and hold the double shot brew button for 20 sec. Then repeat another 2-3 times. That makes the coffee grinds vanish from the top of the gray rubber plate. Does the shots pulled counter, count the 4 shots and the 3-4 back flushing cycles as a total of shots pulled per day of 7-8 shots?

[Oeschioeschi]

I have a question, in the hidden service mode I compare two barista touch models with each other. In the live debug one of them gets higher on the point LD04 e-fast value ? What does it mean ?

[johndoeee]

I know this an old video. But I finally ran Into an issue with my machine. No water for the espresso or steam is coming out. But the hot water comes out the hot water sprout. No error codes or descale. I'm stumped. Not sure what happend.😢

[declansmith]

Hey mate.
Mine has error 8.54.
And 10 and 11.

What should I do mate ?

[alisarahadil]

Hi…. How can I reach you thru messenger?