Chevy Silverado Starter Replacement The Easy Way!

Welcome back! In today's episode, I show you how to replace a start on a 2003 Chevy silverado. this process will also apply to the following vehicles.
BUICK RAINIER 2004-2007
CADILLAC ESCALADE 2003-2005
CHEVROLET AVALANCHE 2007-2008
CHEVROLET AVALANCHE 1500 2003-2006
CHEVROLET EXPRESS 1500 2004-2007
CHEVROLET EXPRESS 2500 2004-2007
CHEVROLET EXPRESS 3500 2005-2007
CHEVROLET SILVERADO 1500 2003-2008
CHEVROLET SILVERADO 1500 CLASSIC 2007
CHEVROLET SUBURBAN 1500 2003-2008
CHEVROLET TAHOE 2003-2008
CHEVROLET TRAILBLAZER 2004-2008
GMC ENVOY 2004-2009
GMC SAVANA 1500 2004-2007
GMC SAVANA 2500 2004-2007
GMC SAVANA 3500 2004-2007
GMC SIERRA 1500 2003-2008
GMC SIERRA 1500 CLASSIC 2007
GMC YUKON 2003-2008
GMC YUKON XL 1500 2003-2008
ISUZU ASCENDER 2004-2006
SAAB 9-7X 2005-2008

Thank you for watching. I will see you all In the next video!

THIS VIDEO IS FOR ENTERTAINMENT PURPOSES ONLY, DO AT YOUR OWN RISK

Keywords #chevystarter #Silverado #Sierra

[kingsong]

My 2001 v6 was a little different ...Just two 13mm Bolts holding it.Got the job done last night.Was a bit unsure of doing it .Thank you very much sir !!! it works GREAT

[the-buckle-to-the-bible-belt]

Thank you so much! I can’t believe I was able to do it myself, it’s because of your video! Watched a few but yours was the best! Thanks Again!

[scottmoyer]

Ty for posting. This video gave me courage. 4wd trucks are a bit tighter than this. Reattaching the bigger wire took some doin'. 10% sorcery. 90% stubborness

[sandymilne]

One of the better videos on the starter change. Thanks

[tokisb]

Just switched mine out because of this video! It was a pain to remove since even my hammerdrill couldnt loosen the bolts but managed to wedge a breaker bar in there and get the job done. It was much easier to put the new one in. Probably saved me $400.

[ponokareject]

A Big thank you, , This vid helped alot..Plus knowing all the wrench sizes made it so much Faster...TY again.

[walterm]

Thank you for posting this video. Telling me what size sockets you use made it faster for me and got it done within a hour

[jorgevargas]

This video helped a lot I changed my start on my 01 Silverado single cab I honestly thought it was ganna be a hassle but it took maybe 30 mins tops to take it off and install the new one . I appreciate it 🤘🏽

[onitcompletehomeservices]

This is the best video I seen on the starter replacement thank you for all your help. It t made it really easy for me to replace.

[Edin]

Changed my starter with your video thanks simple and easy explanation 👍

[BazookaIke]

I would suggest 2 things. One is that you clean up the wire terminals so that they are free of any corrosion. Nice clean metal for optimal electrical flow.
The other is to definitely not over tighten the nuts on the starter wires. I had someone over tighten them on a new starter for me, and a few months later the starter needed to be replaced. Over tightening apparently caused damage to wires on the inside. Twisting them off or something.

[hossymullet]

Great video! I am fixing up my late grandfathers 2003 Silverado so this video was very helpful thank you!

[lonewolflou]

Great job explaining all the details.
I've changed my starter before, and like you I never removed the tire.

[RJ-exon]

Thank Your video is the only one that keeps it real and straight to the point and no bull!!!!
Other guys on here will tell you to take off the wheel and make so difficult to take the starter out of its place. Thank

[keithfranke]

Great video! Concise and views from underneath. Don't let the accent haters get you down. Well done sir!

[robertcringely]

I liked this video, especially when you said not to be timid pushing the wires to get the old starter free. But your 03 Silverado and my 05 Yukon Denali are very different: the Denali is 4WD. There is a LOT less room to install my new starter.

[onenesstvnetwork]

Best video 🎉 I watched the other ones and they made it seem so difficult 😅 Great job and yes oil pan sensor off first! Thanks

[statikjohnnny]

Gave me more confidence to do mine rn I’ll update yall once I am done

Update got it done in 10 min well worth it thank you

[tonylopez]

Oh Yeah. Thank you for all the details. The diagnostics are right on. Didn't skip any steps. I will scour your channel for more tips. Your sponsors made a good choice. I will look to support them as well.

[andysmart-oyfi]

Fantastic job. I’ll tackle my starter and do it this way. Your video editing is great!!! Explain what is needed, why and cut out the chatter that everyone else does. Keep up the good work.