280) How to Make Multi-Dong Picks (Honest Dong Shi Handle w Multipick tips)

How to Make Multi-Dong Picks - Honest Dong Shi Handle that takes interchangeable Multipick tips.

00:00 - Intro
00:52 - Materials needed
01:18 - How to prep the brass rod to be glued in handle
03:07 - Test the brass rod retention with old retaining screw
04:18 - Gluing the brass rod into the handle
06:19 - Prepping for lathe work. I do this to prevent as much chatter as possible since turning metal by hand.
07:04 - Lathe work. This will get us to our final shape. The depth of the hole for the multipick flag is 10mm.
09:28 - Drilling and tapping the new retaining pin hole. Hole is 7.5mm from top. 6.5mm would be fine but then you would need to reduce to pick hole depth by 1mm as well.
11:45 - Final results

Materials Needed:
Honest Dong Shi Handle
Multipick flag pick tips
5mm brass rod
Strong epoxy
Grub screw/Bolt (I used M3 grub screw screws)
Drill bit to match grub screws (2.5mm for me)
1/16inch drill bit for pick hole in tip
Lathe
Drill Press
Tap that will fit the grub/screw bolt chosen (I used M3 grub so M3 x 0.5 tap)

#Subscribe #Locksport

[TheLockPicker]

Awesome idea and extremely well done!! Thank you for sharing this! Added your video to my Dimple Lock video tutorials playlist for people to utilize.

[Dmaclocksport]

Awesome idea and very well executed Dev 😎👍🏻

[Chirael]

Great idea, very useful and thanks for walking us through that 😊👏

[PocketWomen]

Fantastic idea and well made video. This will help a lot of people to use their mutli pick flags even if th4y are having trouble with the handles. A great video. cheers

[Loose-Shirt]

Great idea and very thorough explanation. I want to do the same with piano wire picks I've made.