Self charging Captret still running and LED still lit

Still self charging and led still going. started out at 17.17 volts now is 17.30 volts. been over a week.

For more info about the captret and the captret effect...

Others working on the Captret Effect.

[ibpointless]

@K0W0O0N0 Red LED takes about 1.5 volts to see any type of light. It was bright to start with but now is dim, but keeps lighting. About everyday it increases .01 volts, and it never consumed energy either to run the LED its just been going up.

[oudotcom]

What is the leakage resistance of the electrolitic cap ?
Normally it is in the 100K Ohm range, so there could still flow a current.
Also you have to watch out, some meters supply current from the measurement tips, so the meters could charge up your batteries if you do it right...
I had the same effect with my old scope that charged up a capacitor just by connection the scope head to it and ground it right...

Regards, STefan.

[ibpointless]

@overunitydotcom The meter is never left on it. Just check the energetic forums and overuntiy forums for other people also seeing the self charging.

[ibpointless]

@CosmicGnarler Every setup i make i put on energetic forum and some are on overunity too. I have it setup this way to keep my cats from knocking it down. If you goto energetic forum and post that you want the diagram i'll try to post it again for you.

[KWON]

Hey, what voltage takes the LED to light up?
Interesting performance ^^
Cheers...

[rainmanp]

specs please on paper thank you. send them to me in message. Thank you.
Led + Batteries + cap used. how it's wired.... Just going to replicate and see something... I already saw with a completely different test of mine