Maintenance method for scooter E10 malfunction

[FAUKoo]

Crazy I got to do all this on a brand new scooter. Should just return and get another one

[brunnomarques]

Hello, can error 10 also be a problem with the firmware?

[essenceOfcontent]

Hello. This video is very useful. If it's not difficult for you, could you help me understand which three-phase wire is?

[lindablaire]

I finally figured out and fixed my e10 error on my vsett 9+
Ive got 3k miles on mine, and in the process I have done lots of customization, changes, etc.. One of those was cleaning up my cables. Turns out a twist tie was pinching the controller cable at the handle bar. The big black oval connecter that allows you to disconnect the cable from the throttle unit. There is another one of these connectors under the deck (connecting to rear controller), but that wasn't the problem.
In summary, I would get an e00 error, then followed by e10. Then intermittently my scooter would shut off if the e10 sits flashing for a while. Very annoying.
What I finally figured out was that e00 is harmless. It's a pre-warning that something misfired. If it then goes to e10 (and sits there), the scooter will shut down (maybe).
So after removing the twist tie, i was able to recreate the problem. No error at first, then wiggling the cable I would get e00 or e10.
If e00, you can clear it by cycling the power button thru the 3 modes (miles total, distance traveled, battery %). If you get the e00 again, it means the wire is not in a good position. Re-position it (I used hockey tape). You might hit a bump and get the e00. No problem. Just clear it using the power button. If you get the e00 often, it means your cable is somehow in a bad position. Clear it and tape it up so it doesn't come up. Otherwise it will follow by the e10.
You have to remember that this cable has like 8 very thin smaller wires inside. Which means it's very sensative to bending and pinching.
It may be the case that the factory squished the cable under the deck (on some scooter models). Which is why some videos are showing this under the deck connector solution.
Be gentle and careful with this black harness wire. It's fragile. Try to keep it straight. And don't pinch it with a twist tie lol
Hope this helps

[Michoudu]

Bonjour mon ami g essayer si je me trompe pas c'était les bon fil sur hitway h5 sa me marque e10 mes à mon avis ces pas le même branchement sur celle ci ?

[kylegamey]

Hey I'm kinda stupid and need help with my gyrocopter flash 3.0 escooter. I disconnected the speed limiter(I think) and now it turns right off when I let go of the on button. I reconnected everything back to normal and still same thing. And suggestions?

[theviking]

I have a new 1000watt motor. New brainpower controller and s866 display.
Al connections checkd over and over.
Still that damnd E 10 error! Nothing that i have done helps.
Only thing thats not new is my trottle and battrey.. HELP PLEASE I WANT TO RIDE😤
Trottle is oke. I have checkd with 5 volt.

[ddsanchez-laleydelflow]

Tengo error e11 mala conexión entre el display y la controladora pero no encuentro ningun video que me ayude ayudame porfa.🙏

[grahamsharpe]

My front wheel will not turn it's stuck but everything else is OK any suggestions please respects graham

[javaprogramming]

Good day. I need help connecting the ms energy e20 display, I bought a new board, the old contacts were torn off, now I don’t know how and where to connect

[thegoldengolem]

I rode my scooter to class and it started raining in the middle of class. When I walked back out to my scooter and rode it back to my dorm the scooter turned off and when I turned it back on it gave me the error code E10, after a day of letting it dry out, it still gives me the error code. Should I take it to a shop or get a replacement?

[kenzo]

IScooter is very dodgy company I heard they are put together to last barley any time to break so u buy replacements

[pyang]

Right out the box and turn it on with a E10 error. Please Lmk what i can do.

[bepisti]

Hi!
Sencor one 2020, only one letter E appears on the display. The charger shows a green light, but the battery status on the display shows only 1 led.
Can you help?

[CrimsonRaven]

I got a bird scooter with a error would this work for it

[harunucambarlic]

Da li ista stvar radi na sencor one 2022

[danielmelchor]

cómo puedo solucionar el error 10 en un e22 ninebot

[TheGhostKasper]

Zing e10 пищит пять раз длинными писками и мигает красным и белыми индикаторами, что делать?

[jonathanmarcos]

I have the e10 code thing but i dont want to harm my scoter i barely got it please respond i need help