HTC Desire X T328e repair, disassembly manual, guide

preview_player
Показать описание
Repair manual for the HTC Desire X T328e

Рекомендации по теме
Комментарии
Автор

Thanks for this video, I repaired this phone for my daughter thanks to the video, I now feel like an expert phone repair man still can't believe I managed this since usually when I go to fix something I just break it more lol

onamission
Автор

TY, for this post, worked a treat. the final step misses out you having to remove all the adhesive tape from the main tape that goes to the circuit board connector. Also make sure you heat the screen for a long time before removal and remove from the top. The bottom of the screen extends further than the surround so can't be lifted straight out. Thanks again for a great post :)

andrewquigley
Автор

Finally, I did it without tutorials. It's just like all HTC Desire ;) So look for "dissasembly glass Desire HD", it has so many video-manuals.
I hope you achive it ;)

sospedrar
Автор

Wow im emi from the ETreviews and I found this guide great, thanks for the help!

LifeOfEmi
Автор

You, sir, are completely right! The screen removal is nowhere near as easy as what is depicted here. Heating it up helps, but NOT with a hair dryer. Use a hot air soldering station and set it to the lowest temp (or somewhere in the range of 160-200 C). Even then you will need to use excessive porce to pry the screen away from the body.

Автор

I need replace the glass. So, first I need to disassembly glass from the display, how can I do that? Thank for the info! And nice video, It was really help me!

sospedrar
Автор

i wana replace just the digitizer... do i need to disassembly all the phnoe, or its is enough to heat and replace it? my lcd works, no bad pixels, just my digitizer broked...

Hunyika
Автор

I need to replace my sd card reader could you post something showing how? Or is it relatively simple once you have the unit off that you showed how to remove in the video? Personally I'd say a perfect video would involve all the components of the phone labelled at different time markers on the video so that you know if you want to replace one of them you have to follow all the previous steps. This video seems to miss out some components you could disassemble like the sd card reader.

zedooncadhz
Автор

Muy útil!
Cambiada satisfactoriamente.
Gracias.

agustincalderon
Автор

The phone on the video has already been disassembled. I can see no way to remove the digitizer without breaking the LCD in the original phone. The LCD is sticked to both digitizer screen from the front and to the chassis from the back. No chance to separate them without breaking both.

TzOk
Автор

Cool cheers.
Did you use any type of special glue to stick the new digitizer back to the LCD?

dj
Автор

Some time ago my phone broke the screen. So I decided to fix it alone. I saw your video and help too but I do. You must follow these steps to remove the screen from the mobile or are different?

anastasistheodorou
Автор

Well, it did not go well for me, the LCD broke :(
I wonder if its at all possible to remove the digitizer without breaking the LCD, they are completely glued together. What about putting the phone in the oven at say, 80 degrees C for 30 minutes? I used a hair dryer, but its not warm enough, obviously.

mikam
Автор

I've tried to disassemble my Desire X using this video and am having problems. At 2:58 the video shows the circuit board more or less dropping out of the phone but on mine, despite following every step closely, the board is fixed solid. I don't want to apply too much force in case something breaks. Is there a knack to getting the board out or is there something you haven't shown in this video?

nickypilly
Автор

Dear Sir, I want HTC Desire U T327W dipaly, can u plz provide and what is cost ?

imloyalty
Автор

The glass and LCD are NOT fused on the Desire X, its a simple removal of the glass with enough heat from the heatgun, the glass is only glued on its outer edge where it sits in the front frame, should take a minute to remove with a isesamo, needs a lot heat from the gun it will then lift fairly easily. I repair these all week long, they are not fused to the lcd like the 4, 4s and 5 iphones which are almost impossible to split. replacemyscreen.co.uk

mickety
Автор

Not sure if it varies by country, but my Desire X has Torx T4 screws, not Phillips size 0.

sithemadmonkey
Автор

Hello. I d like to buy display module, will you have several pieces in near future?

mikjanko
Автор

What temperature do you recommend using on a rework station's heat gun blower?

wmca
Автор

Pre tych co si myslia ze to spravia doma: je to rychly navod ako si odj*bat mobil.. v domacich podmienkach je nemozne odlepit displej od krytu, je tam fakt dobre lepidlo, nie ako vo videu. Vymena samotneho sklicka (digitizeru) tak isto, s displejom je zlepene po celej ploche, nie len po okrajoch. Robim drobne opravy ale po vlastnej skusenosti by som dal toto do ruk iba odbornikovi.

marek
welcome to shbcf.ru