Getting Started with LVGL Using ESP32 and ESP-IDF Framework #LVGL #esp32

-----------------------------------------------------------------------------------------------------

Code Repository Link:
Project Path Inside Repository:

This project is based on ESP-IDF Framework, if you are interested in Arduino a project, it is available under the following path.
Video Tutorial of the Project

-----------------------------------------------------------------------------------------------------

Books:

Blog Link:
YouTube Channel:
Facebook Page:
Email Id:
Skype ID:

[rickharms]

Other requirements, must be done only on a Thursday with a full. Better success if you are standing on your left foot. Get my point? Real question, why the different library requirements for the different sizes? Consistency leads to a better chance of success.

[RichardStengl]

I followed your video and the display just flickers a little. I'm using an ESP WROOM 32 board and a 2.8" SPI TFT Module. both the controller and display work with other examples. I compiled with both 5.2 and 4.4.6 esp-idf and lvgl version 8.3.11 and 9.0.0 without success. I have wired the SPI as shown in tft.h except for TFT_PIN_DC which is wired to GPIO_NUM_4 instead of GPIO_NUM_0 (there is no 0 on this board). I was hoping you might have a suggestion? Thanks in advance for any help.

[espesp]

hi sir, I'm just using my laptop screen to take demo. can I use that?

[sebastianbaird]

hello, im struggling to get the touch part to work. i am using arduino ide and lvgl there. the displaying of the ui works fine, but the touch for lvgl doesnt get detected. the touch is working, just not with lvgl. i went and checked the code, and my guess is that the my_touchpad_read function isnt being called. can you try and help me out? This is very frustrating, and i would like to finally be able to use this tool. I am using the demo code, but i just cant get the touch to work. I also added an extra function which is a simple if(getTouch){serial.print"bla bla"}, in the same code in the loop function, and if i touch, it detects the touch on serial, just lvgl is not processing it. am i missing something? do i need to add something to the standard my_touchpad_read function?
Please help :((

[Alex-rvgw]

hi, I am using Platformio esp-idf framework and ili9488 I am not sure am I successfully initialed the display driver may I know any way to identify it?

[jumbo]

I'm beginner. What is ESP-IDF? is it the same as Arduino IDE?
Can I learn this tutorial by using Arduino IDE? I'm not very good at changing to new stuff.

[buddysteve]

This is NOT a getting started video! It’s only a show and tell video!

[Sonictll]

This is a good demo showing, however, the so briefly description of demo is sadly poor-friendly to new learner. That's to say, expert does not need to watch simple demo like this. New learner cannot understand this type of deadly-brief type of description.😂