Fixing All The Problems With My Mini Jeep...

[another_unique_username]

Ed over at C90Adventures can surely tell all the problems to be had with one of these. He’s doing a series of riding one to Moab.

[GrilledCheeseMouth]

I know exactly what the problem is.
If you take the boots off the rack and pinion, you will find one side has an extra plastic spacer/stopper.
you need to cut one of them off.
I was dumb enough to buy one of these. Lol.

[embroiledalive]

Did anyone think that Left and Right turning looked exactly the same?

[charlesw.]

Who wants to see a 3 day solo overlanding survival trip using only wish survival gear?

[zachbrins]

I am absolutely here for Tyler’s mechanic work videos! ✊🏼

[RamoArt]

He's supposed to be a mechanic but this video still has that "what's a sweet potato?" vibe

[travislapham]

Tyler what you could do is just strip the whole thing down to a metal frame and then rebuild it to your liking

[poshhippie]

The 13mm and 14mm thing is because most people don't have two 13mm wrenches. I find it very convenient

[juiced]

Like having a real Jeep! The Jeep experience.

[frankfuller]

Yikes at that battery, that's nightmarishly dangerous, you're lucky there wasn't a fire from it.

[diablokiller]

The throttle cable needs to be secured to the frame not to move so bad.

[Bludduck]

This is how to fix the steering, remove both tie rods put the steering in the middle and adjust the tie rods to fit back in with the wheels straight. Tons of YouTube videos on how to fix this Jeep

[antonknast]

You would put a 13 mm on one side an a 14 mm on the other side because a lot of people have one set of tools at home. It looks like that Jeep is mostly scrap so i'm impresed they at least thougt of that haha!

[vacountryboylifestyle]

Your ball joint is fine. It's the play in the control arm that is loose

[HiiTYDUB]

To fix the steering you need to take the rack n pinion off and center it before you put it back in

[crimsonemperor]

Tyler bought himself an A Grade Chineseium death trap 😂

[Wheelman]

I believe the reason it turns to the right better is because you're sitting over the left tire. It gives the left side more traction. As a kid I had a Powerwheels Jeep and noticed the same issue.

[chrisowens]

"I hate cotter pins" he says as he uses a wire cutter to try to straighten one and pull it out, instead of a pair of pliers like a normal person. :D

[StillShatter]

I think the reason the bolt was a 14m and the nut is a 13m is incase you are working with one set of wrenches your not gonna have two 14s...though I don't know a single person who works on cars and what not that only owns one set of wrenches or sockets 😂😂

[diablokiller]

I would say take it back and try another jeep lol