Charlie's Integra - B18C5 Type R engine swap, pulling out the stock B18B motor and transmission...

Charlie's milano red Type R conversion has begun!... We've got a lot of Type R parts to install on Charlie's Integra LS, from engine and trans to interior to 5 lug conversion... Today we started by pulling the stock engine out, and preparing the engine bay for the swap... Milano red Type R's didnt exist in America, so we had to make our own!...

Please represent Perfect Honda, and buy a shirt or sticker on our website!...
PERFECTHONDA.com

DISCLAIMER:
Perfect Honda videos are solely for entertainment purposes... Never perform any modifications to your vehicle that will void your warranty or in any way violate your local road going laws... We assume no liability for property damage or injury as a result of any of the information contained in this video... Use the information provided at your own risk...

[autosaida]

I almost subscribed. but after 3 years and no update? wow!

[albono]

Coming out good . If you guys are planing to use the ls oil pump, don’t do it, it’s not worth it get a new obd2 oil pump . I made that mistake already

[snooka]

Was it necessary to remove all those parts I thought harnesses radiator hoses axels and header was needed to remove engine obvious also engine mounts that’s weird

[cuevasgt]

What alternator belt size did you use. The GSR belt is to loose

[G_TheCursedMan]

Just asking but my timing belt just snapped when i was driving and coming to a stop then my car shut down and found out my belt snapped should i just replace the belt or rebuild it since its been having cel for my dizzy and knock sensor and common o2 sensor but with 160 compression all across? Idk what to do either use more money to fix it or sell it??

[Iamdc_jay]

Tell Charlie I’ll buy off his b18b engine. Lmk

[MrEggomylego]

Why did you take the crank pulley off?

[nichigd]

I have an integra ls 1998 coupe can the b18c engine slide right in? Or do I need any other parts ?

[SpiLz]

I'm doing this EXACT same project. I have an immaculate, completely stock, red DC3 LS with a B18b1 and I'm looking to convert it to a pseudo Type-R. I was excited to see footage of someone else doing the same thing so I could research the process but this is incomplete and there doesn't seem to be a follow-up vid. Guess the channel died? Shame. What a waste of potentially good information.

[athao]

injection engine integra b18b conditions