VERSINE MEASUREMENT OF RAILWAY TRACK I INDIAN RAILWAYS I PERMANENT WAY (P. WAY) ENGINEER TIPS

preview_player
Показать описание
#VersineMeasurement
#VersineOfCurve
#RailwayTrack
#IndianRailways
#PermanentWayManual
#CivilEngineeringTutorials
#YogeshKaushikCivil
#UPSCESE #SSCJE #STATEPSCAE/JE #GATE #P.way Engineer
#RailCoachFactorySonipat
#PermanentWay

In this video, detailed discussion of #Versine Measurement Using #versine #holder & #versine #kit on #Railway track as per #Indian Railways #P.way Manual has been done with its significance, which will be useful for aspirants of UPSC ESE/GATE/PSU's/SSC-JE /State PSC JE/AE exams and #P.way Engineer on Site.

Following content has been discussed in this video:-
#Versine Measurement Using #versine #holder & #versine #kit on #Railway track as per #Indian Railways #P.way Manual.

Note:-
1. Permissible Versine of Curve is 30 mm per degree of curve.
E. g. If degree of curve is 5° then allowable versine of curve will be 5*30 = 150 mm.
2. Degree of curve= 1750/R
where R= Radius of Curve (in metres).
3. #Yellow Paint Marking should be done @ every 10 metres for measurement of versine of curve.
4. Versine measurement should be done by taking 20 metres chord.

Рекомендации по теме
Комментарии
Автор

गुड़ वर्क ऐसे विडियो कृपया बनाते रहे ❤

ParwatiSioria
Автор

Thanks for the information. Can you please tell me how you have fix the curve correction.

shekharh
Автор

point and crossing ka inspection kaise karte he ispe ek complete video banaiye

ravikumar
Автор

Bhai ji hamare liye achha videos banate hai... Good Har Har mahadev

IPWE_Engineer
Автор

Thanks sir. . Plz make more video about pway work..

saikathatiallrounder
Автор

Still you use the same 20m cord if you want to calculate any curve with different radius

ArthurZiduche
Автор

Where exactly do you put lubricator that reduce wearing of rails on curve

ArthurZiduche
Автор

@3:40 250 reading me se 20mm minus hoga which means actual versine is 230mm

ashishvig
Автор

But for 1 degree curve versine should be 29 mm

kishankumarsahu
Автор

Please provide a vdo on track reading during derailment

diliptripathy
Автор

1°=28.57 mm
2°=57.14
Jise fild me 29, 57 liya jata h

kanhaiyayadav
Автор

How to measure 1 in 20 turnout turn in curve which have approx 1250m radius then which chord will use to measure version

vinodgupta
Автор

Sir on a transition curve rate of change of vesine should be same as rate of change of superelevation. Ye kaun se authentic manual, lette mei likha hai(not iricen book).

vikashthakur
Автор

bro doori atak gayi hai fishplate main ....issi liye zyada dikha raha hai...

wil
Автор

1 degree k liye toh 28.5 hota hai, from NFR

narrouttamdas
Автор

Cord 20mtr me Rakh ke, 10 mtr pe Verise check krna hota hai ?

wisalburnwal
Автор

Superelevation not relate to versine..to correct versine we need to fix alignment of curve

sureshnile
Автор

Where exactly do you put lubricator that reduce wearing of rails on curved track

ArthurZiduche