Casioak Mod: How To Change Your G-shock Watch To Suit Your Style(Modding Guide)

You can find more of the best mods for your watch Casioak here.
watch mod parts aliexpress search for :VICKIT MODWATCH

Are you bored with the way your G-shock watch looks? In this video, I'm going to show you how to change it up and give it a new look with Casioak mods. You'll see how easy it is to switch out the strap, bezel, and buttons to create a whole new look for your watch. So if you're ready to add some style to your G-shock, let's get started.

Tools required for modification: needle picker, cap picker, screwdriver, waterproof oil

Three steps to modify Ga2100 1A1 to AP Royal Oak version:
0:20 Use a needle picker to pick out the pin between the case and the strap
0:34 Use a screwdriver to unscrew the four screws on each side and remove the original Dark knight case
1:00 Unscrew the four screws on the bottom watch back cover
1:12 Take out the back cover and remove the waterproof film and film
1:19 Carefully take out the watch movement, pay attention to the use of the needle lift to pick out the handle of the iron bulge, this step must be careful
1:33 Remove the lens of the watch cover using a cap lifting device
1:58 Fit the Tiffany colored inner ring and align it with the marker
2:09 Fit the lens and and black waterproof ring
2:23 Finally before put the lens on, make sure that nothing dust on it， clean the inside and outside of the surface before installing
2:34 Use a mirror press to recompress the mirror and re-observe for smoothness
2:54 Use the needle picker to remove the marker, and then carefully use the needle picker to remove the hands, hour hand, minute hand, and triangle hand
3:23 pick along the edge of the dial to carefully pick the surface of the black dial along the crevice.
3:32 Put the wiped Tiffany dial, the position should be on the prominent position of the hand
3:58 The hand should be positioned, aligned with the hole, and pressed into the protrusion
5:02 Wipe the dust on the surface, and debug the hands for normal operation
5:37 Fill in the black scale and fill in the Tiffany inner ring
5:50 Reinstall the waterproof glue and the waterproof ring, and screw the back cover
6:01 Reapply waterproof oil to the waterproof ring
6:49 Adjust the time to make it accuracy
7:50 Screw in the screws on the four sides to secure the case
8:31 Aim at the through hole of the watch band and case and insert the band adapter needle
8:44 Install the bow buckle, use a pin picker to fix the spring position, and then insert one section of the bow buckle, and the other section of the button with a button.
9:39 Finished product display

👌Enjoy your handmade mods. Hopefully this video will get you started on modding your Casioak.

#gshock #casioak #ga2100 #modification #diy #watch #watchmodify #watchparts #watchaccessories

[oomz]

This is exactly the video I've been searching for, thank you.
Already ordered parts from your link too. 👍🏾

[AmitKulkarni-zr]

Wow man you are an Absolute Expert You seemed to be completely at ease throughout the entire modification process Too bad you do not live anywhere near me (Mumbai, India) else I would have probably mod most of my Casio watches

[comingsoon]

What can i use instead of cap lifting tool

[omarbonavides]

Excelent video! One question, what tool do you use to re insert the hands??

[ffightrs]

After you remove the hour and minute hands, do you do the same thing to change the face on GAB2100 tough solar model?

[iskandarismail]

Hi.. this is interesting.. will u be able to share where to buy the tool u use to clean the dial/hands (the black pen with rubber tip??)

[jalamont]

Why did you cut the marker ring with clippers?

[Suspect-R]

Hey after i changed the hour markers now my watch aint able to sync and it sometimes stays twichting in place does anyone know how to fix ?

[mtaylor]

Where did you get the dial with the G-shock logo? I can't find it. All the ones I find have no branding or logo.

[nomanejane]

How many models of the casioak are there?

[stephenwolf]

You should mod it to have longer hands. The OEM ones look stunted and short. This is a problem with most analog G-Shocks.

[craigcreationz]

Can you post links with the mod tools?

[ciuciobelo]

The cyan band is a lil bit too much, besides that one of the best mods i've seen so far

[khalifagabriello]

Bro i wanna buy one of your custom watches 👏🏾

[hfder]

Does removal of the crystal have a negative effect on waterproof specifications? Good video.

[SlimDaGoat]

Are you selling custom watches or mod kits?

[andreaspolizois]

Do you have a link to the exact coloured pieces you use here? There are quite a few light blue variants around 😏

[AmitKulkarni-zr]

You modified the watch from Gents to Ladies Nevertheless, congratulations for a good video Can you mod a watch for me ?

[atreinhardt]

I appreciate the video but for the love of God, why would you not make sure the hands line up perfectly at high noon?

[musicmike]

The music doesn't work for me...I would rather hear a voice over describing what's going on.