Efficiency and surface quality are unquestionable! #shorts #cnc #machine

Tung-Tri

■Products & Cutting conditions :
［Tung-Tri］z = 2
　Insert : TOMT040204PXER-MM AH3225
　Tool : EPA04R010M10.0-02
　Vc = 300 m/min, fz = 0.08 mm/t, ap = 3 mm, ae = 10 mm, Vf = 1530 mm, n = 9950 min-1　

［Solid End Mill］z = 4
　Vc = 120 m/min, fz = 0.04 mm/t, ap = 3 mm, ae = 10 mm, Vf = 640 mm, n = 3820 min-1　

■Work material : S50C/C50 (1049)

■Machine : BT30

#shorts
#cnc
#machine
#engineering
#technology
#tools

[TungaloyCorporation]

■Products & Cutting conditions :
［Tung-Tri］z = 2
　Insert : TOMT040204PXER-MM AH3225
　Tool : EPA04R010M10.0-02
　Vc = 300 m/min, fz = 0.08 mm/t, ap = 3 mm, ae = 10 mm, Vf = 1530 mm, n = 9950 min-1　

［Solid End Mill］z = 4
　Vc = 120 m/min, fz = 0.04 mm/t, ap = 3 mm, ae = 10 mm, Vf = 640 mm, n = 3820 min-1　

■Work material : S50C/C50 (1049)

■Machine : BT30

[purplehazerokker]

Ok now use tools with the same corner radius

[eitangonen]

The BEST indexable inserts shoulder mill soultion in the market!!!!

[Convolutedtubules]

Impressive but why is the shank so roughly turned on the outside? Surely a smooth finish would be preferable, especially in deep pocketing, where it will allow for smooth chip evacuation.

[brianhandwork]

No machinist worth a crap would us an endmill with a 2" loc. To make a .375 deep slot. Not to mention the endmill is square corner vs. The insert cutter that has a corner radius...

[erdemerdem]

Bt 30 tutucu için, çok çok güzel çalışma...

[darioarias]

Se supone que el de insertos es para desbaste
El otro es para acabados

[eddiedimas]

.25 LOC vs 1.5 LOC.
What did you expect?

[zapfi]

it looks like up are 2 pieces of steel clamped together

[slavasirotkin]

2 пера заведомо быстрее пойдут и чище будет поверхность, чем четыре, некорректно так сравнивать!

[Alexander-iujk]

Will sehen wie wird bei 1xD zustellung

[MrSauseBraus]

Bitte 1xDurchmesser fräsen. Ah.... Kann der Wendeplattenfräser nicht?

Das ist wie den Kofferaum von einem Kombi mit einem Sportwagen zu vergleichen..

[MarcOlsen-vm]

I wounder how it would preform if the majority of the tool body was also made of tungsten carbide. Where the head where braced on just like with carbide boring bar's

[JarppaGuru]

its fine i get better result other way

[Виталий-щоб]

Вы, рекламу делаете для китайцев, когда у нас не плохо работает наша отечественная фреза.

[fmillz]

All good until you want a deeper d.o.c.