extruder mould wire and cable extruding mould cable extrusion die

Extruding mould:

The inner mold of the squeezing mold does not have a tube -shaped bearing part, and the inner mold is reduced behind the outer mold corridor. The melting materials are finalized by the pressure through the pressure. The plastic layer is tight and the appearance is flat. The size of the angle of the internal mold and the outer mold determines the size of the flow pressure. The size and surface smoothness of the inner mold and the outer mold directly affect the surface quality and shape of the removal of the wire. The squeezed output volume is relatively low. The disadvantage is that it is difficult to adjust, and the thickness of the insulation layer is not easy to control. And when the core wire is bent, it is easy to cause the plastic layer's eccentricity, so it is necessary to adjust the tension of the line and adjust the eccentricity. Generally, the wires and cables that produce small cross -section are mostly used for insulation.

[yagsaaa]

Nipple and dies. I'm working on extruder and CCV LINE . Cables assembly