UPDATED Installation Guide for RISE Kit on PS5 BDM 030 / 040 Controller - eXtremeRate

The main updated process is to place 4 plastic pads onto the controller mainboard to make the board more stable.
NOTICE:
Soldering is optional, if you don't need the touchpad button, the L3 & R4 buttons can be mapped, so please skip the soldering process.
The installation was demonstrated with the PS5 BDM 030 controller, the BDM040 is similar to it.
The tutorial includes the plastic and metal RISE Paddles.

Shop Links:
Plastic Version Shop Links:

Metal Version Shop Links:

Timestamps👇
00:00 - Introduction to the 030/040 RISE Remap Kit
00:40 - Disassembling the Controller
04:05 - Optional Step—Touchpad Remapping Cable Soldering Tutorial
06:52 - Optional Step—L3&R3 Remapping Cable Soldering Tutorial
09:15 - Installing the Remapping FPC Cable to the Mainboard
11:29 - Applying the PC Pads onto the Mainboard Corners
12:24 - Installing the Battery and Remapping Cable
13:28 - Assembling the Plastic Back Paddles & Back Shell
19:31 - Assembling the Metal Back Paddles & Back Shell
25:37 - Back Paddles Self-Check
26:38 - Remapping Tutorial
27:52 - How to Cancel a SINGE or All Remapping Assignment
28:20 - FAQs

[reno]

I came to write this, After Installing the controller on BDM-030 ( This works for BDM 040 as well)

DISCLAIMER: YOU DO NOT NEED TO SODER IF YOU DON'T WANT TO ROUTE TOUCHPAD OR R3 and L3

Basically, in this video if you're not trying to route the touchpad to the paddles or R3 and L3, then skip from
4:02 to 9:31

0-4:02 (from 0-4:02 it shows you how to take apart the controller to reach the areas we need to get to)

4:02-9:31 ( shows you how to solder and what's needed to route the touchpad to paddles) (THIS IS IF YOU WANT TO ROUTE TOUCHPAD AND R3 and L3)

9:31-12:50( is showing you the process of putting everything back together as well as adding the necessary strip for power to the paddles whether plastic or metal)

12:57-13:27 (shows you the requirements if you want to route the l3 and r3 buttons, this requires soldering once again) ( if you do not care about those skip straight to the plastic or metal paddles installation part)

13:30-19:32 ( this is the plastic paddles installation)

19:32-25:35( this is the metal paddles installation)

25:37-27:17( This is the remapping tutorial) (how to test if it's working properly, what to look for if it's not, if working properly how to map buttons to paddles)

If you follow all of these steps correctly and precisely you will be able to get on your first try, remember to make sure everything is plugged in PROPERLY, I'm not an expert but figured this might help some of you out.

Thanks!

[chuckrichardson]

This is the way I did it with the original remap kit because I didn't understand why they would have you a fix it to the board with 3M tape which will eventually fall off and the connection wouldn't stay so it was common sense to attach it to the pegs directly versus sticking it to the board.

I'm glad that this is an updated video for those that don't think outside of the box or the original directions as I'm sure this will help many others

[HarryTheDon]

We want clicky triggers for bdm-040!!!!

[ScrNocks]

For all the people struggling keep trying, this shit has to be so perfect it seems lmao took me fking 7 hours to have it be funtional

[bertanyanik]

I dont get any red light and the buttons won't work when I start a game, what did I do wrong?

[BilalIjaz]

Guys if the red light isnt turning at all, it could be the contacts. It was for me and you have to use one of the pads in the the other video the first one (not the updated one) to heighten the contacts so they can connect to the electronics of the kit. if anyone doesnt understand lmk!

[Spnge]

I’ve done everything exactly as shown but the LED on the back is not turning on at all can Somone help

[BilalIjaz]

Please update the updated video with how to heighten the contacts with the pad Thank you! @ExtremeRate

[zBxder]

Thanks ur video is way better than the original I did it in 15 mins

[lmac]

Do you know why now that when I installed the led kit in my controller the trigger doesn't work??

[expert]

I did everything like in the video but the led indicator did not light up at all, why?

[JoGroove]

My red light turns on but my remapped buttons don’t work?? The paddles click fine but i doesn’t get the remapping. Any help??

[MoussaBallaBakayoko-qjhu]

Thank you very much!
The video is well done and the explanation is very clear.

[NowzerBeats]

omg finally after 2h
don't give up guys
the lights didn't show on for me, because I plugged the big orange connector in the wrong way
double check everything you'll find

[YoutubeAccount-qqzj]

I have customers complaining the paddles intermittent not working. And I found out when pressing L3 the paddles would stop working and when releasing they work fine again. Is this the reason you use the 4 plastic corner pieces instead of the EVA tape?

[Hmz_elk]

I did this and now my controller does not vibrate anymore. It makes a sound as if it want to vibrate but it is stuck. Anyonye found a fix?

[Jacob]

The k1 k2 button do not work when i give the comand k1 plus triangle or k2 plus R2 when on i have to turn off then back on and it workss is it supposed to function like this ???

[BilalIjaz]

the light wont come on and the contacts for r1 r2 l1 l2 are aligned pretty sure, i checked 2wice

[bryanquintanilla]

I can’t get my controller to turn on the right light some help pls I’ll pay yall if yall get it to work asap

[SlimPalaceclips]

I can’t find the bdm-040 version on Amazon. Will the bdm-030 kit fit my bdm-040 controller?