DCS Locking Plate

The DCS Locked Plate features – Low-profile design reduces risk of iliotibial band
irritation (distal femoral fractures) and trochanteric bursitis (subtrochanteric fractures).. The DCS Locked Plates are made of 316L stainless steel and are cold-worked for strength.

• The DCS Locked Plates are available with 6 to 16 holes, for
varied clinical situations.

• The Dynamic Condylar Screw is designed to provide
strong and stable internal fixation of certain distal
femoral and subtrochanteric fractures, with minimal
soft tissue irritation.

• Two flats within the DCS Locked Plate barrel correspond to
the two-flat design of the lag screw, preventing
rotation of the DHS/DCS Lag Screw within the barrel.
The two-flat design also eases insertion of the plate
over the DHS/DCS Lag Screw.

• DCP holes in the DCS side plate allow angulation of 4.5 mm Cortex Screws and locking option for 5.0mm Cortex Locked Screw axial compression across a shaft fracture.

• The two holes closest to the barrel accept 6.5 mm
Cancellous Bone Screws. This enhances stability
by allowing:
— fixation of the most distal condylar fracture
fragments with two or more screws, or
— fixation of the most proximal subtrochanteric
fracture fragment with two or more screws.

The DCS Locked Plate is indicated for the following fractures of the
distal femur:
• Intercondylar fractures
• Supracondylar fractures
• Unicondylar fractures

[heron]

A medição é antes da perfuração do parafuso cefalico medular

[karenfisher]

Why are your triple reamers complete in the casket? Steam in autoclave won't reach all surfaces of the adjustable reamer. Should be centre reamer, fluted reamer and nut in separate parts to be assembled by the scrub nurse.

[dhavalvasani]

it is for proximal femur or distal femur?

[Nivaldo-mpuk]

Acho que vou faser os fêmur de ser o de ipê acho que fica mais resistente