How to Install Gripset Waterproofing - Episode 22.

preview_player
Показать описание


Follow - RENOVATION JUNKIES - For Ideas and training.

Follow OurBuild -

Thanks Guys, any questions please leave them in the comments below.

Cheers, James.
Рекомендации по теме
Комментарии
Автор

Great work Guys!
It is phenomenal, and Your Methods are Soon To Be ‘The Standards’ in the USA Building Market as well.

Unfortunately, at this time a Vast Majority of so-called Professional Plumbers, Tilers, and Bathroom/Shower Renovation & Remodeling Contractors are extremely expensive, yet REMAIN under educated ALSO demonstrate their widespread Under-Performing Work Experience which shows up in the final product.

These Fools bemoan any sort of improvement in construction method, refuse to employ them, and never Innovate like they should. It actually quite often turns into an argument just to have them do the job to basic A.N.S.I Standards. It’s ridiculous here.

However, there is huge home owner, manufacturer, and a regulations movement to have all of our bathroom & wet areas prepared in the same or similar manner as Standard Practice in next few years.
Thanks for the educational content. Cheers!

MedicalScyntist
Автор

Just watched this video over and over, 👍 read the comments 😄😁😆😅🤣😂 that'll teach ya.
And i subscribed.

Inherited a 45 yr old house I'm completely changing the floor plan, this includes 3 bathrooms 🤪 so I'm researching all the new codes and methods.
Can't afford thousands of dollars to pay a waterproofer, 6:52 3 bathrooms and a toilet.
The only claim to fame i have is i used to be a mechanic and i fitted showerscreens for 15 years, so i saw A LOT of crap going on there.
Just need knowledge.
Or a shit load of money.

joelbabb
Автор

Gripset are the only company that teaches the right way to waterproof wet areas and how to recess for the run off into puddle flanges. I learnt from my experience of doing my own bathroom the Gripset way. Good work Gripset👍

suebiddle
Автор

Good video. I used the self-adhesive Butyl tape recently on my laundry and will be using it in my shower reno. The tape is elastic so it will deal with any wall movements in the future which is great to reduce potential cracking/tearing

gungahlin
Автор

Amazing work guys! Top notch products used 😉😉

GripsetIndustriesPTYLtd
Автор

what about a rendered brick wall on concrete slab, are all the edge tapes still required if the wall is render and sits on the concrete?

ExposeClothing
Автор

Great Video. It would be handy if you could update the description with the details of all products used on this job.
I am newstarter to this industry. Going to do Cert III in Waterproofing. Should I also consider Cert III in Tiling or is there sufficient work available for people with waterproofing skills

BaGaBwithaB
Автор

So are these bathrooms being waterproofed both under and also on top of the screed??

geoffstein
Автор

Hello
Do you have to achieve a 12mm cove with that product?
I seem to get mixed opinions.
Great work guys

jasonrezo
Автор

Hi. I was just wondering, upto what height is recommended for walls in WC and Powder room?

chimidema
Автор

What is the standard industry way for applying the waterproofing - over or under the screed. You have gone under here but can that lead to permanently wet concrete/screed and a damp smell?

davidcollins
Автор

I bet you laid the second layer over those dusty foot prints. Edit: yip, ya did.

FranklinLive
Автор

When doing my waterproofing qualification - I was taught that no plasterboard setting compound should be used anywhere the waterproofing membrane is to be installed. The reason for this is that the setting compound will re-emulsify and turn to slop when it comes into contact with the primer or membrane - this will stop the primer & waterproof membrane from adhering properly.

In this video, you can clearly see the difference in the set joins on the wall before and after the primer is installed. The topcoat has been broken down by the primer and turned to slop.

Much better to leave all the wet areas with bare plasterboard/villaboard and let your waterproofer seal all the sheet joins, niches, internal/external corners with a flexible sealant.

vzgsxr
Автор

Would if liked a zoom I on the water stop and how it works as it seems alot of failures occur due to this....

petermargetis
Автор

Thank you for your infomative viedeo

gleny
Автор

What type of primer can use on sand n cement Bedding please

alantiling
Автор

I have decided to use this system. Is there a reason for not applying the membrane over the tape around the window?

vitoferraro
Автор

Wow!! Is that true that we need for a diffe3rent membrane type for just plastic puddle flanges, please? I`ve never heard this before! All what I know is... we need to use a special primer for plastic surfaces to enhance bonding to w/proof membrane. And, as I see, no every single manufacturer has such special membrane for plastic :)

alexanderchuyko
Автор

If a tile bed needs to be laid for floor fall is it done before or after this water proofing step?

glen
Автор

If builders have already installed vanities, door jams, arcs etc what do we do then?

anthonygolding