CityBug Decat Manifold Fitting Guide + Tested / Catalyst Replacement Installation (C1/TAygo/107)

preview_player
Показать описание
Fitted a Piper performance de-cat exhaust manifold to the Shitroen.

The process is pretty much the same as replacing the catalytic converter, so this informative instructional video could also help as a catalyst replacement tutorial 🤔

Piper manifold vs stock/decat
Рекомендации по теме
Комментарии
Автор

That stripped M10 bolt into an M8 nut using an M9 tap & die is genius 😊 Thanks.

infidelcastro
Автор

Just Thank you for what you do it's always entertaining, long live the shitroen

barryrogers
Автор

Over 20 minutes and not one "fanimold"? Unsubscribed and reported

thhc
Автор

Stupid Bloke Stupid Videos: 'Molesting the citybug so you don't have to.'

deepchillzone
Автор

Very jealous that yours isn’t leaking I haven’t been able to find a way to stop my piper manifold from leaking at the flange currently got 2 gaskets and a sealant all around it and it’s still leaking

ShaunBourke
Автор

I’m interested to know what sorta mpg your getting after all the mods?

standard_ad
Автор

They aren’t road legal I wouldn’t fit one as they cause pollution. I don’t have kids so there isn’t their health to worry about. I told my insurance in the eighties I’d put different manifolds and a straight through silencer and a bigger carb on my Austin Mini they said it won’t make any difference- it was about 4 miles an faster at top speed than the standard one I overtook eventually 😂😂😂😂. On a disused airfield of course where I later nearly caught a non genuine police car at 105 miles an hour in the same Q plated Mini😂😂😂😂

Monbleydonraces
Автор

When you going to fit a supercharger kit?

Dark-Lord
Автор

My 107 has no subframes on or doors or bonnet or seats. If the doc considers me fit to drive it might be one out come if not it will be a different one and I’ll need a clown suit to satisfy the locals who take the P cos they think I’m nuts. But as a lightweight (possible!) who will be the clown?

Monbleydonraces
Автор

Don’t you just wish that when you’re fitting a wheel they’d used studs so you could align the wheel without having to support its weight. I wouldn’t want to fit a massive wheel to a very large vehicle with bolts!!!!

Monbleydonraces
Автор

If this can give me more mpg, I'd give it a try. Thanks for sharing.
👍

onepalproductions
Автор

Just to demonstrate my far superior knowledge, the ring end of the 22mm spanner WILL fit over the connector plug of the lambda sensor so you don’t slip off using the open ended side and batter your knuckles

GTiR
Автор

When is this shitter getting a turbo/supercharger 😂..
Great video Kenneth.

ukdroneking
Автор

Nice one. I'm thinking of getting a piper manifold as well for the Aygo. But now you mentioned hollowing out the stock cat, that might actually be a good idea and save a few quid. To pass the local MOT I'll just get a universal sport cat and install it somewhere in the middle

mariabutler
Автор

Enjoyed this, SBSV! Idea for a future project: I decided I want to paint my current shitter C1 and have been watching about 18 thousand YT vids on painting cars with rattle cans. Some turn out like a polished pig and some pretty shockingly good. So there you have it! First a bit Karate Kid ("Sand'a car, Daniel-San") to roughen the clear coat for adhesion, and then you don't even need primer if you use an enamal paint (like Rustoleum) or a nice matt acrylic (like Autotek). PS.. Bright yellow is said to be the best colour for rattle cans - can barely see imperfections and naturally blends between section. I'm going matt black though. Go for I dare ya!

droge
Автор

Hello your videos are great can you tell us where to buy all the parts and where to find a reinforced clutch. Thanks

schmittalain
Автор

One question, iam not sure but have you already remove the catalyst from inside of the manifold ( the old one ) before you take it out to put the new one? If yes did you see any difference in performance? Thank you for your nice videos even with one hand!!👋

mikeallan
Автор

Did it go through the MOT ok without a Cat?

davidlaw
Автор

Nothing like a greased up flange. YES!

JAYG
Автор

I bought a new one it was just described as performance - I should have sent it back it didn’t say it wasn’t road legal.

Monbleydonraces