How to add a second LAN to pfSense

When one LAN is not enough!

#garyhtech #pfsense #opensource

[impy]

FYI, if you do not see your second LAN appear in DCHP Server, make sure when you set the static IPv4 address in Interfaces that you select / 24. Gary does mention /24 but didn't explain that the second LAN won't show up in DCHP Server if left to /32.

[pirateradio]

Thanks Gary for the quick and to the point video!

[EOS]

Thank you, much appreciated. You have helped me a lot. I have done this way instead using VIP as VIP was working weird with stateful traffic bw different subnets in my pfsense/VM.

[resakaflash]

Hi Gary,

If I wanted the 2 networks not to be seen?
If I ping from network 2 to network 1 it responds
Is there a way to block them from being seen?
Thank you

[karankamble]

Thank you for the video.
How can I allow communication between LAN and OTHERLAN in this setup?
Please help.

[robbielancaster]

Hey bud. When you configure a second subnet in this manner, how do you make the second lan receive an ipv6 address? I noticed on your interfaces you don't have any ipv6 addresses.

[tzeweitan]

Excellent video, May I know what is the difference assigning vlan or direct on the interface?

[patrickteoli]

Thank you. Do you have a video where 1 IP on LAN can have access to the whole subnet of OTHERLAN.

Thank you

[MichaelBakeryThree]

Sir do you build your own pfsense appliance or buy it as it is? I would like to build a 10gbe just like yours. Thank you

[waynemantell]

Hi Gary, thanks for this video and the one on access and deny between the two LANs. I have got this to work but have been unable to make the second LAN reach the WAN side. Have tried various firewall rules but no luck.Any suggestions. Thanks Wayne

[djmattc]

Thanks for the video, I actually stumbled on this after setting up a new port on pfSense already and was looking for instructions on how to set up internet access on the newly created port. Maybe you could clarify that on another video?

[pramodkumargangwar]

hi sir may you help ?
actually captive portal is not working on second lan interface.

[Mike-klyc]

Could you do one for opensense? I got a VP2410

[SoWhat]

tow lans with two dchp separate network on one router. OMG