Milwaukee M12 Rotary Tool Review - Better than Dremmel

Picked up a new Milwaukee M12 tool, nice light weight Rotary tool.

Quick unboxing then off to some cutting of a new part for the Supra.

Let me know if you have any questions on the tool.

@rmjsupra
@suprasinvegas
@supraculture

[garyd]

This video explains why the Dremel burnt out prematurely (I’ve had my corded Dremel for 25 years and use it a lot). These tools are meant to use the speed of the tool to do the work. Hence the high RPM. They are not high torque therefore shouldn’t be forced. Ps never use a cutoff disc to smooth the edges of your work. Not designed to be used with pressure on the flat edge. They will break. I’ve had plenty break using as intended. Use a grinding bit. I hope you’re wearing safety glasses.. stay safe. Cheers

[Wunderkeks]

*This Dremel is awesome **MyBest.Tools** I’ve had several before but this is my first cordless and it’s awesome. Not having to be tied off to a cord is great.*

[johnshilling]

DUDE!!! Read the safety instructions! Cut off wheels, when used like a grinding disc, become extremely frangible and will fly apart. At those RPMs, the fragments will be like Super Sonic razor blades! Easily cut right through your jugular. Only use The Cutting Edge! Face shield and gloves, too. Don't die!

[tiberiu_nicolae]

Watching him cut that piece was a total cringefest

[Cabal]

There is no faulty tools but there is faulty operators who not know how to use tools...

[zamplify]

My favorite collet is the whatchama collet

[ShakespeareCafe]

Wear some heavy duty leather gloves and hold that tool with authority. You also need a face shield with safety glasses behind it, that’s standard protocol.
Anything that spins at 30, 000 RPMs can permanently maim you in an instant. The way you’re using this tool you’re just begging for that disk to shatter. Don’t underestimate the torque applied here. Those DeWalt clamps aren’t rated to clamp metal.

[louismac]

My Dremel burnt out after a year but didn't do a year's work with it only used it a few time. Well pissed off

[devil]

Now I know why you burnt your Dremel let the tool do the cutting stop putting so much pressure on it

[javybeaz]

I used this for 3 years. Destroys Dremel junk

[christophercharles]

Just checkin' in, my friend...are you still alive? I hope that's a resounding "yes" and that you have all your digits, etc. too. I just bought the same rotary tool, thanks for the review.

[RiseT]

After using it for awhile is it worth it over dremel? Looking to buy either Milwaukee or Dremel to cut out the outlets and such in drywall. Thanks

[tenken]

your voice sounds like Badger from Breaking Bad. like if u agree.

[lilystrong]

Never flex the disc while cutting. And going straight into the metal like that will cause it to bind.

[bill-njfc]

lmao, he could not operate a battery operated tooth brush

[seahawksforever]

I got mine today and on speed 1 it doesn't spin. It spins on 2 and up. Also, the battery light goes away after like 5 seconds after turning on. Is this correct?

[richardkaye]

You are an accident waiting to happen, you had no idea what u where doing but thanks for the review

[Immzee]

so cringe watching you cut with that watch videos how to use those

[brerrabbit]

Will the Dremel flex-tool I just bought fit on it? Or does Milwakee make their own? It's definitely not any quieter than a Dremel.

[DWORLD-xlpb]

Will it take Dremel bits? I’ve always thought Dremel was overrated but they have the best accessories. Great review. 👌✅💪🏽