Siemens SIMATIC S7-1200 PLC || How to Upload program from S7-1200 Siemens PLC using TIA portal

Here i will demonstrate how to take the back up of an S7-1200 PLC Program. Every PLC has its own deivce, network and logic configuration. Using TIA portal, i will upload PLC configuration and save all these configurations to my PG/PC.

[seiftamazerti]

Very helpful and clear
great tutorial
thank you 😁

[rajeevkapila]

this video is very simple great tutorial please make a video s7-200 smart & other upload to programe

[lucastai]

Very fantastic teaching video .
one question
May I ask the question is How to read 3rd meter value from
CM1241 module, programming ? Data-type setting ? Below
System configuration ..

cpu 1214
modbus comm. module 1241
power meter 4 sets

CM1241 link to 4 sets of Power Meter ( Modbus RTU ) ?
Any video is relative to the issue ? Thanks

Lucas

[PLM]

Very complecated for a simple action....SIEMENS 's world

[chandrasekhar-scyv]

Sir while Ur IP address selected then ask subnet mask as need to same is it right in this video as Ur explanation how I sub net mask make it same Pc and PLC

[veereshmatad]

Really its excellent video to understand, could i get help online if need? i will ask my company to pay the money for that.

[tahaeng]

Thank you so much
My question is how make configuration at PLC S7 1200

[vatsalthaker]

Hi i uploaded one project from tia v12 i successfully but tags had not uploaded can you have any idea how to retrieve it from plc

[kakinadamachinery]

Sir what type configuration needed for plc programing

[assemelamirelmasri]

I have old code for the programmer who programmed old machine the same type of the machine that I would like to upload the program from the PG to CPU which also consist of two inverter and HMI as well can anybody assist me how is the procedure will follow in steps for example at the beginning I have to connect the PG to the CPU with ethernet then I click the CPU inside the TIA Portal and click up load the program after can I download the HMI program from the same connection where all the nodes connected together with switch and the inverter is connected to the switch as well, because it is first time for me to download machine from scratch so I didn't know exactly how to proceed in such situation, and I don't know if I need to make some adjustment to the PLC CPU hardware or just when connect immediately will communicate with the computer or there's a different IP address already exist, sorry for my long comment but to be honest this is first time I do such stuff so I am worried if I will ruin the hardware of the machine the matter is a little bit sensetive and I wish that the probability of error will be as much as minimum .
Please guys if someone could assist me in this matter will be highly appreciated thank you all.
There is possibility to contact me directly in whatsapp in case you would like to assist me .
Whatsapp: [phone]

[GOMAENGINEERING-dsfv]

can we upload HMI as well

TP or KTP series

[dougmeade]

Can you upload the HMI in the same way

[kayodeadepoju]

Hi Teacher I’m trying to install S7 1200 PLC. Please how do I go about it

[I-n]

Hello. Could you please tell me what kind of cable you used to connect? is it twisted pair of regular?

[iscmpvo]

i have a problem for plc after a few months plc does not work it asks for a registration code

[cbhiocq]

What if the HMI is connected to the CPU? How can I go online?

[dzhkvdk]

سلام عليكم ممكن انا في المغرب أورد بنتي اتشتغيل في شركت أسمنت بي كنض

[yousafshahzad]

I have message
Action cancelled before upload from device

[martinrmz]

Hi Sir, i need make an upload from a PLC 1200, i checked PLC online and it has tia portal 13, but with hardware version 4.2
So in my PC I have tia portal 13 but the version arrives untill 4.1, when I try to make an upload it goes wrong

Is there another possibility to get the online program?

Best regards

[ngongpangjulius]

Sir, can I have a training session with you?