Don't replace VW air pump before watching 5-cyl p2432

preview_player
Показать описание
Рекомендации по теме
Комментарии
Автор

I appreciate the walk through and the info but “before you buy a $60 pump buy this $200 sensor kit” is a bit backwards haha

blacklistem
Автор

First, disconnect the hose where it meets the egr valve and on a cold engine start the car the check to see if air is blowing out of the hose, this will tell you the blower motor is working and then check for cracks on the hose and then check the egr valve itself if it’s opening or closing, you can look the hole if it’s moved up or down .. if all those work then it might be the sensor

neondiamondsaquaberry
Автор

Great detail expressing the noise helped tremendously

LasVegasVet
Автор

Thanks man, I'm hoping this works

carmelohernandez
Автор

Very informative. But the video leaves me with questions. Are you suggesting to try this instead of replacing the air pump, or in addition to changing the air pump? Also, what's the kit referred to as? ThX

GWynn-ycbf
Автор

I know this is an old post but I'm getting a P0441 secondary air flow incorrect flow. So this should fix the problem? It's a 08 new beetle with same engine

MauroReyes-rg
Автор

Really informative, covers all the bases

robertstjchal
Автор

Does anyone on here know where the sensor is on an 07 bug convert? I see the hose/pipe from the air pump (under the lt fender) to where it connects to the metal valve/unit near the head. There is no sensor in that hose/pipe. The air pump tests good but does not run when connected to the wire harness and I do a cold start.

lrayvick
Автор

If I install a aftermarket cold air intake that doesn’t come with a place to reinstall the air injection hose what I can do ? Do I have find a way and connect it back or I can leave hanging in there?
Oba: I have a cat delete downpipe and straight pipe all the way back..

vaqueirogyn
Автор

I can’t seem to find where the harness plugs into on the body of my Jetta

littleheatac
Автор

Why are there no videos on how to replace? Mine is actually broken and all I see are "don't replace. Watch this first" type of videos...

Kevin._.Sanchez
Автор

Just found out I have a p2433 secondary air injection sensor. Do you know if it's in the same location.. Can't seem to find the information anywhere. Thanks for showing this, really hope my 2010 is alittle easier.lol

dcartellone
Автор

Do that part make your car shut off or won’t start at all

alayijah
Автор

My 2011 VW Jetta SE has this same code and it tends to stall when starting up or when at low velocities. Could this secondary pressure sensor be responsible for the stalling?

mariopatlan
Автор

Hello there can you tell me the parts numbers or add the links for it thanks 👋

carlossalazar
Автор

i took my air intake out and i must have ripped the hose out of the sensor that it connects to. so its connected to the intake but not the pump. i cannot find where this thing connects or where that sensor is that you replaced. i cannot see a place on the pump where this would connect. the only code i get is map

joey_bag_a_donuts
Автор

What's the part number of the repair kit?

scooter
Автор

Can anyone help me find the link to where he bought that

lanascorner
Автор

Maybe this is my issue. I keep getting P0238 and it doesn't make sense. Good sensor, wires, and no leaks.

spidergoose
Автор

P0491 code definition

This is the OBD-II code for Secondary Air Injection System Insufficient Flow Bank 1, indicating a problem on the side of the engine which contains cylinder #1. ALWAYS TO CHANGE MY PUMP?

robertogiron