How to set endplay on your Tremec T-56 Magnum Transmission

In this video we demonstrate how to set inplay on your transmissions so you can have your machine running at it's best. If you have any questions or video ideas be sure to comment those down below. Thank you for watching!

We hope you enjoy this video! If you did, be sure to like the video and subscribe for more content like this!

Bowler Performance is passionate about making sure you get the best transmission for your hot rod. We make sure our transmissions are tested, and in peak condition so that they are ready to go as soon as you order one.

[boostedjb]

Awesome video!! made swapping my mid plate a breeze! And customer service was awesome had an issue and got it resolved super quick and easy, thanks for the tutorial

[Supercharged]

My T56 that I've been into too many time had NO discernable in/out play on the input shaft. I set it up with dial indicators and wiggling crap back and forth to decide what shim to use. I had a single .046" shim in there and using this method I landed at a .057" shim stack. I never had any confidence in my previous method but this is foolproof as you cross the line both ways. Definitely how I'm going to set them up goong forward.

[brockbauer]

Same process for a regular t-56 out of an 05 GTO? I dont have a shift rail detent and a few other things

[Pattymayoisaputa]

I wish you would have shown actually installing shims

[WayTooStrong]

Why does this method work better than targeting a specific spacing (“end play”) such as that in the 2002 t56?
Is this a good practice for all transmissions, or just for the magnum?

[sategllib]

I'm guessing this works the same for a t45 since they're very similar

[streetking]

Could have done it without making all the noises from your mouth