Best OTF Fidget Toy Knife Fully 3D Printed

Fidget Knife (3D Printed). No hardware and screw.

STL download:
Comb blade available

Printer:
BambuLab X1C
Filament:
BambuLab PLA Basic

#3dprinting #fidget #OTF #cosplay

[sterling]

A little bit of grease on the little nub in the front of the spring carrier/blade guide helps it operate more smoothly, at least for me. Very nice design, yes it is more complicated than others out there but it is also more reliable. Thanks for sharing!

[Quad_Plex]

Second print I ever did on my Ankermake M5, printed without brims using PLA+, works stupidly good and is so much fun.

I used the comb variant and will be using it as a travel comb from now on.

MAD props for the design, it's honestly superb

[benjelum]

2:08 if you actually came here looking for assembly instructions, recommend muting it as OP didn't think it necessary to include any information except music mixed too loud, GL.

[ExactlyThreeBraincells]

really cool! Printing it in a solid black matte sunlu on my A1 right now. I never thought about how silky filaments could somehow affect mechanical properties. No idea how that even works but it's interesting to know.

[Tyson_-]

This works so much better than all the other ones! Amazing work!!!

[Dprint_life]

This is a great model! It’s so fidgety and satisfying, printed perfectly on my a1 mini both times! He first time though it didn’t work because I didn’t listen and used silk pla, but the second time it printed perfect and worked great!🔪

[bobthebuilder]

I'm super impressed that you modeled up that mechanism in Blender!

[Adam-wrrg]

I sat down to it prepared for keychain-prop-like experience, and took me 30 sec just like in the video. I used PETG comb instead of blade, and it took just a minute of breaking in to run perfect. Good design, thanks!

[harpmudd]

Best OTF knife I've ever printed. Very slick! Thanks!

[MechNuggets]

Super fun prints on the channel, really nicely designed. Subscribed!

[gugan_]

I was so surprised that even though assembly was so simple, it works incredibly well! This is one of the most satisfying prints I've done, thanks!!

[abcd-lhq]

omg thank you ever other OTF I have tried didn't work but yours did great print

[GamesGraphicsHDPRO]

I had to try a few times, couldn't get the blade to slide. Took it apart and tried again, then it worked!! Thanks for sharing!! I used black and red pla basic!👍

[connornevitt]

Nice! Really impressed how well it all comes together, very satisfying!

[Jijhebtmijnnaamnietnodig]

yea got it work after you vid ^^ just had to press down a bit harder than i thought while sliding out

[roober]

Thank you for making all your beautiful designs. You just earned yourself a sub😀

[indigoKitsune]

for a box opener its really really good, i did print from PLA and yes from of the bed its STIFF as hell but a dab of DW40 works wonders, i have checked my PLA and WD40 wont degrade it THAT much

[Chiai]

printing it a this moment good that i watched the video cause i wanted to print the blade in silky. :D

[oKMz]

Very cool model, I saw it a couple of days ago over at makerworld and recognized the username! i've printed another OTF fidget knife before but these look like massive improvements over that one.

[SmalBlock]

Question, mine can't really shoot out upwards. It doesn't "lock" at all when shooting it upwards. Used matte PLA for everything but the blade. (Blade has matte + silk)
What migh tbe wrong?