Hummer H2 Transmission Pan Replacement in under 39 minutes

Hummer H2 transmission pan replacement in under 39 minutes. Step by step...

[MyVidsJG]

Great video. I really appreciate the time you took to make it. Just one thing I found. I was doing mine on the ground with jackstands. Could not get clearance of the pan and the exhaust pipe. Solution that worked great for me: Undid the Transmission mount nuts and then used a bottle jack to lift the transmission near the oil plug. The transmission and shaft lifted about 2 inches real easy and thus no problems getting the pan in and out. If it were lifted like you did, you might use a screw jack to lift the tranny after loosening those bolts. Easy peasy.

The thing I did not do (because I'm an idiot) was put the Lucas Transmission treatment in the pan before putting it back on. I saw that in another video and thought that was cool. Meant to do it but heat exhaustion was setting in. Thanks for the video!

[ronh]

Thank you so much 🙏🏼✌🏼🔥
How much Power on the bolts? (Torque)?
Thanks
25:56 😊

[Cookefan]

Excellent!
f there is a YouTube camera man award, this person should get it. Great views and angles. The mechanic is great as well. All in all a great instructional video especially the last bit of work needed with the screwdriver to pry that pan out. I would never attempt this myself but at least I now know what’s involved including removing that skid plate. I only have one question.
Is it necessary to remove the skid plate to access that plug bolt? I ask because I can do that. If there is like a hole that allows removal then I can easily do this myself. I could then at least drain my own transmission fluid and replace it.
Thanks again for going to all the trouble of making this video! 👍🏽

[hummerfixes]

Thank you for your excellent video, hat's off to you guys. May I ask what model year the H2 was? Do you know if an 2005 is the same parts and procedure? Thank you again !

[J.Crooner]

Nice video wanted to know can the transmission fluid drain plug be accessed and taken out without removing the skid plate?

[robocop]

Thank you for the video after I watch the video I replace the pan and gasket on my hummer 2 it really help me a lot save me a lot time

[logankirby]

Doing the same thing but with my 2008. Do you know if I need to take the muffler off first?? Thank you!

[mako]

I noticed you didn't clean the gasket mating surface on the transmission. Wouldn't this affect proper sealing of the gasket?

[J.Crooner]

Btw is that a standard or extra oil capacity new transmission pan you're installing?

[aarongrant]

Is that rust gonna be a issue later or is all that surface rus

[bkellewood]

Nice, I had same issue... I'm gonna bend that shift cable bracket now😈

[sammiller]

Hey GREAT VIDEO... I'm assuming that this yellow beauty is your H2... If I may ask what year is yours and what was the mileage on the odometer when you did this fluid change... Reason I ask is because I own and daily drive a 2005 HUMMER H2 and it has 196k on it... I've owned it for 5.5yrs and I'm the 3rd owner of it... I have never changed the fluids for any of the drive train being trans... transfer case... front and rear differentials... But I'm doing all of that now... Just wanted to get your 2 cents... Thx

HUMMER... LIKE NOTHING ELSE...!!

HMMWV... H1... H2... H3... 4LIFE ❤ AM GENERAL 👍🤠🇺🇸st

[J.Crooner]

🙋Hey bud have you upgraded the transmission cooler to this truck? I wanted to put the Tru Cool max 40k transmission cooler on it but not sure if I can make it fit in there. If you know already feel free to share info when you get time.👍😎👌

[phantomlg]

Does anyone know what's the torque for the oil pan bolts?

[ParfaitSalemon]

Démontage arbre de transmissions avant 4x4pont boîte de transfer H2 Hummer

[alexanderautomotivedetaili]

Watched video. Thank you. So don't take off heat shield. It was the bracket in the way.

[bigfootswatching]

Don't understand why most these guys touching all these toxic chemicals never wear gloves!!

[bigfootswatching]

I think it's time for him to change his gloves!!