Fix squeaky car bushings/suspension with At-205

[aprellamafrellaeatsmajella]

After watching your video, I tried this on my 2017 Chevy malibu as I have 1 bushing on the rear passenger a arm that is SUPER squeaky and is very loud and EXTREMELY annoying. Bought 2 bottles (which cost 27.99 each now) and sprayed the piss out of that bushing. Let it sit 2 and a half days without moving my car. Got in it to go to work, and it was still kinda squeaky. I thought it didn't work and decided to spray it again after I got home that next morning. Well I didnt get that chance because after driving 82 miles to work, I realized THE LOUD ANNOYING SQUEAKING WAS NO MORE! It literally doesnt make a single peep anymore. Im grateful I found your video. THANK YOU THANK YOU THANK YOU! My boyfriend thought I wasted my money and your video was probably doctored until he didnt hear my car squeaking leaving the house and then pushing on my rear of my car bouncing the back end to try and make it squeak. This stuff works, even if I have to spray it again in a couple months, its freaking worth it! Again, THANK YOU!

[skt]

if you really want to get fancy with it you could spray the bushings, then cover with plastic wrap for 2 days. everything will soak in and it'll be like brand new. Also hit it with silicon lubricant after a few days.

[markh]

Same here. Saw on Scotty's channel, too . Used AT-205 on 8 year old car and 28 year old car. It really works !! Thanks .

[warrenjansen]

Thanks Matt. I saw this on Kilmers site, but you showed before and after. I just came in from doing the wife's Santa Fe. It was very loud! Can't wait to see if this fixed it. I'll let you know!

[rockslide]

Very helpful. Nice looking truck. I sprayed my SUV today. You're right, wear SAFETY GLASSES.

[lennywallace]

Also, don't forget to grease those those a-arm bushings, you can see they have grease zerks to lube the inside metal bushings 👍🏻

[eyalbarmitzvah]

You can use a foam brush to put it only on the rubber parts and reduce waste on metal

[jimb]

I've been using AT 205 ON MY 2008 HYUNDAI SANTA FE for the last 3 years on all rubber bushings & CV boots as preventive maintenance once a year to rejuvenate to extend the life of the rubber.

[silverdollar]

Dodge has the best suspension to try this on. I used this on my work truck which is a Ram and it helped. Thanks for your time and video

[kevroach]

If your in the UK and find it difficult to find this stuff try STP stop leaks.
Similar stuff and does the same job.

[jameslee]

Is it enough just to rejuvenate the rubber, vs actually lubricating the rubber?

[gofasters]

Some people say you can Duluth 50/50 with water. I would guess with newer cars to do that not older cars with old bushings.
Thx for the video

[scdoty]

Matt it looks like a bolt is missing on that cross bar bushing on the right (4:00)

[philipmerleau]

May I suggest more of a stream spray directly at the rubber itself, or syringe squirt. That shit is expensive and you'll waste it by using a fine spray.

[dsfj]

Do you clean the bushings before applying? Soapy water etc? I have silicon spray applied a week before and wondered if this would affect the absorption of AT205 for my '94 E220 Mercedes Coupe. Thanks from Australia

[MrStubat]

Very important …do not get on your brakes or anywhere near them

[flatliner]

Well, gonna have to try that out. Shouldn't take a whole lot on the toys to rejuvenate and keep them quiet. But, if it gets rid of stiff and hard, not sure that's gonna work for her.

[oldmantaiter]

Looks like ball joint boot split open @ 3:35 - may want to replace

[jairfitness]

Thanks bro for your video I will try on my audi q5 2012

[GregoryMcCord-hn]

Ok Matt cool me and you have ture rims got a question dude where can get another center piece hub cap from some took mine off my Lil Ford ranger