Build: Simple CNC Box with Fusion 360

My first project with Fusion 360!

PRODUCTS:

Standard Disclaimer: Putting your soft, squishy fingers near powerful sharp spinning things is dangerous. I've been doing this for a while and I know what I'm doing but even I'm not invincible. I take a lot of safety precautions based on my level of experience and not all of them are shown on camera. Don't do anything you aren't comfortable with. If it makes you nervous you're probably doing it wrong. Don't do anything stupid. Reapply sunscreen often and floss before bed. Is anyone actually still reading this?

[andersstrick]

This piano piece for the carving is an exhilarating choice. A real meditative time watching your videos ;)

[detonation]

For anywhere you want tight tolerances my advice would be to cut the first pass over sized using the "stock to leave" option in Fusion360 and then come back in and creep up on the fit by repeating the contour toolpath on just the bit where you want a tight fit, on each pass slowly adjust the stock to leave until it's as you want. After a while you get to know your machine and can creep up on really good fits without too many iterations. BTW you can have a positive or negative "stock to leave" in fusion360 i.e. cut undersized or over sized compared to the CAD model.

[farcow]

the production of this video is A+ ... captivated me

[markthomas]

Man, your videos are such a treat to watch! for someone that pays such close attention to details like me I can tell that you do too and it shows in your work and its very pleasing to watch. That is besides your filming abilities and the way you edit your videos its an art and you mastered it. Just wanted to share how your many videos I have watched have made me feel. Keep up the great work !

[ASKirkland]

So good! I am sure your boys were stoked! Great to see you back in the shop and makin videos.

[jacobselem]

You have so many cool things in your garage, that's workshop goals!

[JohnColgan.]

Great builds. Shame about the slack lid issue, a couple coats of poly would take up that gap & you can hide it behind the waxing finish

[Nickporter]

Very good use of stickers on the router and dust collection!

[irrlycht]

U really rock dude! greetings from germany :)

[RonKillian]

Beautiful box! Awesome job, You need clean sweep rings on your jessem lift :)

[outdoortherapy]

awesome project and easy to watch thank you

[Andre-]

Awesome thanks. As a complete novice, I was wondering what is the accuracy one can achieve on a mass production doing this process? Meaning if I set specific sizes with the cnc, how accurate will be let's say the actual inside pocket compared to the settings? Because I have 200 ceramic dishes (rectangle shape) and I would like to have 200 trays made and then put the dishes inside the trays (I'd like them to fit as precise as possible without leaving to much of a gap). Would you say too much variation occurs among the trays causing some dishes to fit and some don't?

[JohnMadeit]

I made some small boxes like this on my cnc also. But I cut it I 3 bits to bottom and centre bit then glued the centre and bottom bits together. I did that to save time on the cut process. Nice video

[johnnyreagan]

Great video as always! Love the Fireman axe over the weber woodshop sign. Very cool music for the beginning of the hand sanding, being a DJ in my previous career I appreciated the music and video editing. Keep it up!

[konradhunter]

The problem I’ve had with friction fit hardwood boxes is the fit will change over the year even if it’s perfect when cut. It can be loose in the summer and too tight to open in the winter. Or vice versa. Because of this I now cut them loose and add magnets.

[michelebenini]

Easy but really nice job ! I love your shop man 👍🏻👍🏻👏🏻👏🏻👏🏻

[pelemariusv]

Very good editing skils... Supuper audio...wonderfull content... Thanks for what you do ... Subscribed! 😉

[mattkey]

Love your video editing style 👌🏼. Enjoying your experience with the CNC and Fusion.

[Carpenters_Canvas]

fusion360 is my favorite, im going to dive deep into it, my new onefinity is on its way and i have a basic understanding of fusion, all the other ones i cant grasp for some reason

[brycecacho]

I would recommend following Winston moy, nycnc and Lars Christiansen. I just made a box on my shapeoko. This turned out nice. You could of used and 3D adaptive path and made it go faster. Fusion is great but I have a lot to learn myself.