Shure pgx4 & pgx2 can't be syncronized

[Telecaster]

you might want to check if the power supply is sufficient. If you run it with less than 12V it will light but won't work :-)I had that happen, too

[Ragnardapisadinha]

My microphone lost frequency, I can't find anyone to help me

[kimlongnguyen]

The PGX transmitter operating frequency band is not the same operating frequency band as the PGX4.  This can happen if you have multiple PGX systems.  Look at the PGX4 rear panel and find text that reads, as an example, H6 524-554 MHz.  Then look at the PGX transmitter for the same text.  If the PGX transmitter reads J6 572-590 MHz, and the PGX4 receiver is H6 524-554 MHz, these two products will not sync. NOTE: Use color coded adhesive tape to mark the transmitter/receiver pairs that operate together.

[coffeehigh]

Shure I think can be the problem that’s who!

[aaronou]

I have the same problem as you, can't solve it. And frequency is the same. And was working the whole time suddenly disconnected and not works

[pagodedojappa]

Ola!! Resolveu esse problema? O meu aconteceu a mesma coisa

[td-audio]

PGX4 receiver with frequency of H6 524-554 should be compatible with PGX2 transmitter frequency of H6 524-544. And so on…

[KAMERAKINGS]

you suppose to hold down sync button until it syncs

[MarcolinoMDM]

hi could you tell me if under the capsule you have the switch to regulate DB? from 0-10DB in case you send me a photo

[superdjrumbero]

Question soo this pgx4 is compatible with any shure microphone wireless ???or same specific microphones