NITECORE MH12 Battery Level Indicator

How to access your Nitecore MH12 Battery level indicator and how to read it.

All you have to do is count the blinks.

Thanks for watching and please be sure to comment, rate, and subscribe.

Weston

[gregger]

Thanks for the demo!! This really cleared up the badly written factory instructions, which lead many of us to believe that you have to hold down the tail switch and the mode switch and look for the flashes.

[kenrn]

On the manual, it says that less than 3.5 V is low battery? What's the lowest blink that it goes down too (like will it reach 1 V or there's nothing lower than 3.5?)

[RyuTakeru]

Omg Thank You for that bud just got my Nitecore MH-12 V2 a few days ago and for the life of me i couldn't figure that out, it also took me a day or 2 to figure out that the battery indicator blinking all the time meant it needed to be charged, fucking Nitecore never goes into that so I'm thinking something is wrong with my light. Wasn't until i put in a fresh 18650 cell that it stopped and i was like oh it just needed a fresh battery, not that the manual goes over that either 🤣🤣🤣🤣

[xaviermunoz]

great reviews I've watch all you review and bought this after doing so great flashlight but can you explain how the volts work? so 1 flash is 1 volt meaning it's almost dead? I'm a noob at this

[XxUndeadFilmsxX]

For some reason, after fully charging it, it still isn't completely charged. And when I do this, it only flashes three times. Then it flashes an additional five times before turning on. Any idea on what could be going on with this? I'm hoping it is just the battery. But, I'm not sure.