filmov
tv
2014-2017 Lexus CT200H F-Sport bumper conversion from 11-13 old style
Показать описание
Swapping your bumper to the 2014-2017 F-Sport CT200H is actually very easy! It only calls for 1 simple modification to the fog light bezel, if you don't want to buy new fog lights. Check it out!!!
0:00 Start
0:33 Intro
1:05 Fog light removal (old bumper)
2:45 F-Sport bracket modification & install
4:59 Install the fog lights (F-sport bumper)
6:30 F-Sport grille install
7:46 F-sport chrome trim
10:29 Lexus emblem removal (old bumper)
11:19 Bumper seal/weatherstrip removal (old bumper)
11:59 Wire harness removal (old bumper)
12:24 Install the wire harness, emblem, and seal/weatherstrip (F-Sport bumper)
13:30 Transfer the u-bolts or bolt clips to the new bumper
13:48 Mount the new bumper (F-Sport)
15:00 Clip in the bumper ends to the fender/bumper retainer
16:47 Secure the lower & upper bolts
17:18 Install the radiator cover
17:43 Tow hitch cover install
18:15 Outro
Thank you for stopping by and watching our 2014-2017 Lexus CT200H front bumper conversion video. This video is mainly only converting your 11-13 CT200h front bumper to the newer F-Sport style. We believe that the bumper conversion for the F-Sport looks infinitely cooler than the old style. The aggressive look on the big face grille or bumper just looks a lot more aggressive than the bumper your grandparent would prefer.
CONVERSION PARTS:
2014-2017 Lexus CT200h F-Sport Front Bumper Cover
2014-2017 Lexus CT200h F-Sport Fog Light Bezels
2014-2017 Lexus CT200h F-Sport Top & Lower Mesh Grille
2014-2017 Lexus CT200h F-Sport Chrome trim (grille)
2014-2017 Lexus CT200h F-Sport Fog Lights (optional)
2014-2017 Lexus CT200h F-Sport Fog Brackets
TOOLS NEEDED:
A wrench or socket wrench with a 10mm socket. A Philp's screwdriver and a flat-head screwdriver, or panel clip removal tool.
THE PROCESS:
Of course, you're gonna need the conversion kit and to remove your old or damaged bumper. It's a very simple process with the same tools. We went ahead and added them to the video at the beginning and end, there is also a link above. We also listed the parts needed above but the fog lights and bracket are optional. We'll show you have saved money by NOT purchasing the F-Sport fog lights.
We started with the fog lights and normally you could just get the F-Sport bracket fog light but we did not. The fog lights were about $200 each from the dealer, so we figured out that you can use the old-style fog lights with a simple modification. The fog lights are near identical but the F-Sport bracket has a slit that won't allow the old fog light to sit properly. We cut that small piece off the F-sport bracket and the fog light fit perfectly. Watch the video carefully to see where to make the cut. Once the fog lights were installed, it's pretty smooth sailing. We installed the cool bezels and installed the mesh grille with chrome trim. The trim is separate from the grille but they both just snap into place and are secured by small screws. Transfer over the wire harness, Lexus emblem, and small u-nuts or bolt clips from your old bumper.
Once all the accessories have been installed, you can now install your front bumper. This should be a very easy process, especially since you've removed the bumper already. For those of you who just don't have a bumper, mount the bumper and secure it with a top bolt. Snap-in the bumper ends and attach the fender liner. Make sure that the splash shield is not hitting the bumper. On the passenger side, we did have to slightly move the windshield reservoir a bit for the fog light to fit. It's a pretty straightforward install and be sure that you snap in all the plastic clips, screws, and bolts. We hope you enjoy your new F-sport CT200H look!
Follow Us on:
_____________________________________
#Lexus #ct200H #fsportconversion #DIY #revemoto #paintedautoparts #HowTo #Lexusfsport
DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Комментарии