HOW TO MAXIMIZE YOUR IWATA WS 400 PERFORMANCE

In this video i will be reviewing the iwata ws400.

Products used in this video:

[LittleOLosBurnouts]

I have this gun. I’m a total amateur but it is amazingly good. I was blown away by it. Makes amateurs look good.
It’s worth the money.

[markmikheyev]

Best way to set up your fan is open up the fan fully up set your pressure you want to use then start winding the fan in once the psi starts to rise that’s where you want the fan

[krzysztofjakubczak]

Jak dla mnie Iwata nr jeden na Świecie w pracy mam ich sześć.Ostatnio namówiłem szefa i kupił mi Iwata ws 200 wbs dolnozasilany podłączony do zbiornika ciśnieniowego devilbiss kbII robi robotę lakieruje nim ogromne zbiorniki i rury na srebrny metalik zero jakichkolwiek smug iwata jest super w każdym wydaniu.

[kingsway]

I recently got one of these and have been using it for clear for the past week or so and I'm really impressed. At first it was making me nervous because I was sure I was going to run it but the transfer efficiency is amazing and it's atomizing perfectly I'm used to being much more careful and making a lot more passes to get a smooth finish

[dandee]

i just got this gun yesterday. Best gun i have owned so far! I set my sata x5500s aside for now

[arthurmatthews]

I have a 4600 a pro lite and a iwata . And the iwata ws400 is my go to every time clear coat gun. The best gun l have found for painting big vehicles like trucks and vans is the Sagola 3300.

[socalpaints]

I have two of these guns . Super good for blending panels . Love it

[stizolac]

Mario, could you use the LS for base with just as good results?

[mariopaintclass]

Was up guys!! I was spraying at 29 PSI JUST IN CASE YOU WERE WONDERING. Subscribe to the channel if you’re new and leave comment.

[Supanova]

1st time i used the gun it was a water hose runs every where. Did you reduce wth activator ? by how much. Also my settings were, Bottom wide open/trigger wide open and fan 3.5 out from closed fort he fluid.29 psi

[themechanicman]

Using a iwata 300 for base an SATA jet4000rp for clear coat know one thing I've learned every single gun that I've ever used each Khan has its own specifical use and feel sometimes you got to put the fan pattern up out in a little bit more material little bit last I never keep the same material settings and fan settings to out my painting history if it looks a little dull I ad a little more material if it looks a little too wet high-back it off and sometimes clear depending on the clear and how much too clear is reduced and how much the base is reduced usually I do a 12-1 on the base and I try to use a good premium basecoat and I use a good clear coat and the stuff I'm using now is glasurit to 2 1 1 if you don't reduce it it is a high-solids euroclear and it'll seems like it'll be peely on you so I reduce it down a little bit sometimes more than the one to get a real nice flow but everybody has their own way of spraying you get to know the guns in the materials and you can lay down a fantastic job put me in the battlefield with any of them with any of their guns and I guarantee you mine's going to come out looking pretty good and I don't like spring clear at too low of PSI. Nor do I like it too high of PSI I think the manufacturer on the clear that I use says about 10 to 13 PSI and I liked it at about 20 to 25 and sometimes more so there were the only two guns I like to use I'm sure there's other ones I've had this at a jet 2090 all of them these are my two best guns in the Sata 95 for spraying enamels and clears and also high-solids primer and then I got a 400 iwata for spray primer

[enforced_viper]

I usually open my fan all the way and go in 3- 3-1/2 turns in i set my fluid wide open. My base and clear coat guns dont have regulators i listen to the air pressure itself also while. Spraying base coat metallics my first coat may be nice and even but if i notice my second coat applying like my first tells me too much air. Usually means tiger stripes and model the main thing for me is watching how it hits the panel

[rejauntreasure]

Bro 😎 this guys content is phenomenal keep up the excellent work

[craigcarter]

So I have the older version Ls 400 pininfarina 1.4 I can't use it for clear?

[enforced_viper]

I dont have regulators but im use to listening to the pressure of my guns. I put my fluid until i feel resistance and open fan all the way and turn in 3 turns and from there i watch how im applying the material if i feel the pressure is to high or to low i adjust it to comfortable finish settings

[zackzack]

You absolutely right no doubt this is the 👌 best spray gun thank you for posting this.✌️🥂

[Jandsconcepts]

I bought one of these and setting it up the fan pattern don't spray evenly one side is to heavey I have sata clear guns and other iwata guns don't have no issues with them

[TheSubieSanctuary]

There ya go! This has been the gun ive been eyeing as my future clear gun.

[victorbelmares]

Just purchased a ws400 super nova how many turns in on the fan 2 or 3 turns . Been painting 40 years but I've been using a sata jet

[JimmyJiveJones]

Me and the other painter at my work have this friendly competition on who can achieve the best results in our paint work. Im using strictly Teknas and hes using the LS400 and a Sagola. The difference in our work is very minimal. I know the LS400 is a better base gun, he also uses it for clear sometimes. But in your opinion is the difference night and day or just a tad better