How to finish a #3DPrinted part

[MakersMuse]

If you want to learn more, be sure to watch the full video via the link in the bottom left!

[gjallarhorn]

A cool video idea could be doing the most cost friendly way to post process 3d prints

[BluePhantomCreations]

A super helpful video for us newer designers would be a video that goes over how long each different method of smoothing prints takes, as well as cost. I love your videos by the way!

[anzaca]

I've seen another guy's video where he just uses plain spray paint to fill the grooves, then sands it down smooth.

[oakleytheaussie]

THE BLUEY THING IS JUST SO CUTE LOOKING HOLY-

[ben_jammin]

Look into "orange peel" effect. May want to invest in a compressor and a couple of spray guns. Better control over the flow, as well as the amount of thinner. Mirror finishes :)

[MENTALTAKEDOWN]

My local hardware store on the US just got over 90 colors of Montana spraypaint, that stuff is so nice

[Henry_Swanson]

If I wanted to sand all damn day till my hands hurt, I'd still be doing my last YouTube inspired maker hobby making knives.

[ChronoTango]

Not to mention humidity will mess with clear finishes depending on the formulation. This is something called blushing and I have become painfully aware of it at my current job.

[BeefIngot]

This spray putty seems exactly my speed to make it less of a pain to do. Probably still won't, but it does look much easier.

[Kurmake]

Warming the can in hot water and letting the paint cure in warm dry place helps with the orange peel

[jimmytvfclassic]

Both German Montana and spanish Montana (mtn) are the best spray paints. As a Barcelonian it's very cool to see our paints all the way down to Australia 😊 that remembers that I have to service my 3d printer, an Anet A8 which I learned a lot from you when I got it

[sscp]

Now I just need get blessed by a priest and start assembling my 3d print

[Bartlett]

Montana paints are the best, painted a mural with them once.

[jolandanvt]

Could we maybe do a video doing the opposite? I love good layer lines, it's nice to see how it's made honestly, like a painting you can see the brush strokes. I'd love to see a video where layer lines and texture has a place.

[adriandiazdeleon]

I use 80, 220 and 320 grid sandpaper and I think it gets the job done pretty well

[Gone]

Montana are made for graffiti. The back cans - montana black are even made for bombing. They have more pressure makeing covering of large areas easier.

[Motorbike_]

Thanks! I have been looking for a good automotive primer in Australia. All the other videos are in other countries.

[travisphelps]

Yes correct 100%. Never use the red putty junk. It’s trash and chips easy. Nice instructions 👍 sanding is the key. Lazy gets the chips.

[seynoonrae]

MTN Hardcore, my favorite spray paint.