Ford 6R80 valve body removal,transmission range sensor,lead frame change,transmission fluid fill.

Gear Indicator not lighting on dash, shifting problems, large orange wrench displayed in vehicles information center.

[markburgett]

I was afraid to tackle this project, but your video is leagues above even the pros trying to show this. THANK YOU! You did not miss a detail. It took me three hours but only because I was laying in the gravel on the ground, but you did an amazing job and I got it put back together and it works great! Thank you so much! Mark in Wisconsin!!

[MegaJared]

Thank you for showing how that shifter needs to line up. Every other video skips that part

[CrazyForBeingSane]

Thank you. This is the only video I found on the internal range selector for this type of engine all day

[soloriomartinn]

I just did mine today, dealer wanted over $2000 cause my suv has rebuilt title and void warranty, $150 part from amazon, $40 oil, 2 hours of work
Thank you so much buddy, great video

[henrycomputer]

Wonderful. Wonderful. You include common sense stuff we need to know and leave the bull out. Opposite of what the big guys do. Thanks for sharing your knowledge. God bless you. Keep it up. I know a lot about the old stuff made in the 50s to the 80s but am lost after that. I used to work in a machine shop and always shared my tricks. The customers loved it and always came back.

[yhorzer]

Gracias salí de duda con tu vídeo soy de Venezuela y estoy nuevo en las cajas automáticas…me gusta la mecánica hidráulica.

[llopez]

Thank you so much!!! I've been looking for this for weeks.

[jstealth]

Awesome video! Thank you so much. I'm going to replace my lead frame this weekend. Should be much better with this video to use as a reference.

[gaspuppygarage]

Spot on! using this video IJust did mine on a 13 Ecoboost. No surprises! Thank you!

[Guap]

Literally in the process with doing this myself, took mine to Ford dealership they're giving me the run-around they can't replicate it there's no code stored and I don't have time for it to sit down for this maintenance guy to drive it around for however many days it takes for it to happen again just so they could diagnose it, of all places I found one at Advance Auto Parts for $200 just going to knock it out myself thank you for the video

[davidmk]

Have this problem with my 2016 5.0 F150. It wouldn't start, or it would idle rough and die. Took it to ford who claimed my trans was completely dead - gears were sheared as per the advisor. Quoted me $8k with parts, taxes and labor for a new one. Or, said I can trade it on a new one, but I wouldn't get much for mine due to a failed transmission and high mileage. Didn't belive the guy for a second. Took it to the private shop I goto usually and this was what the problem he said. Getting fixed rn.

I'd like to try escalate the situation with ford who tried to screw me over and have me pay 8k!

[brianmcnutt]

I have watched several videos concerning this tranny and yours does a good job on the shift linkage connection and showing how the electrical connector has the rotating piece that makes it lock in so thanks for that!

[ytpiano]

My truck had a no crank no start issue. I send it to my dealer and they change the lead frame. Now it starts. Took 4 weeks for the parts to get here.

[coryswinerton]

My Gen 2 6R80 with only 1600 miles on it after a rebuild, flared 300rpm from a 5-6 gear shift. Now, when trying to move forward, it seems like 90% of the line pressure isn't allowing full engagement in D, and the RPM just climbs with very little forward movement. Reverse engages perfectly fine. The car was driving perfect for the first 7 minutes, and then this came out of nowhere. I believe its a solenoid/valve body issue. No codes came up. I am swapping the valve body, bridge and tube seals today.

[kevg]

4:40 Genius, I never thought of putting grease to keep it from falling out.

[bobd]

This was a great video. I think I can do this job. What is the torque on the bolts.

[harounelmir]

Works for Mustang 2012 too. Thank you for the vid helped a lot

[JB-twhg]

excellent!! I'm going to try and tackle mine this weekend. Thanks for making it easy enough for a motorcycle (shade tree) mechanic to figure out!! LOL

[artyart]

Thank you sir, just saved me a couple grand. Wow followed step by step trans is back to normal.

[goatee]

Was thinking I'd do this job, your video is awesome and showed me I probably better not! lol. Thanks!