Spektrum NX Setup: Dual Aileron using Separate Channels- Basic (NX6/NX8/NX10)

Step by step walk through of how to setup Dual Aileron with NX Series Transmitters! If you're new to Spektrum or NX radios,after you watch this video you will be prepared!

Spektrum Transmitters and Receivers: (Affiliate Link)

Owners Manual PDF:

#SpektrumNX #Setup #Howto

[Optimiser]

Thank you very much. That info sorted me out.

[robertlute]

Thanks a lot for the info. I struggled in multiple ways trying to figure out what was needed to get both ailerons working together on multiple rates. I had to go back into the opening setup to choose dual aileron channels before it would work.

[-cmafia-]

BD thanks for the video. I love these short tutorials you’re doing. 👍👍

[charley]

excellent videos, straight to the point. Thank you so much.

[dylanvanderpool]

Thanks for the videos, but I have a question. Trying to set up flaps on a plan without flaps from this video and another of yours, I can set the flaps, but I cannot get the servos in the same direction when using switch D for flaps. What can I do to fix this?

[readytext]

Once the wing configuration is changed, will SAFE mode work on the new dual ailerons?

[johnhalligan]

Hello,
Thank you for this series. I have a question. I've watched both the duel aileron and duel elevator set up videos and they say to use ch6/Aux1 for the extra servo on both. What if I am setting up both duel elevator AND aileron. Do I just pick another aux channel to assign?

[Cosme]

How can I correct one aileron throws more than the other on spektrum receiver channels 2 and 6?

[johnd]

Let’s say you DO want to use a Y splitter, how can you make the servos act opposite of each other in that case? You can’t reverse the channel because that would reverse both of them, correct?

[saralucas]

how did you assign Aux 6 to the lift aileron? Thats the hook up I wanna use.

[asafm]

But what if i have a safe select receiver with AS3X (AR630), wouldn't this setup change the way the gyro currently behavies? Because my receiver's gyro is programmed on 1 channel Ailerons with a Y splitter.
So how can i set up Flaperons/ spoilers and still be having the gyro features enable?
My plane: Aeroscout s2 rtf
My transmitter: nx8

Thanks in advance

[jcb]

thanks..If it's even possible; is there any way you could do something on using' ailerons' as a partial flap mix, on a plane without flaps ? have a great weekend.