How to seal Concrete & CMU block walls and foundations with Liquid Rubber Waterproof Coatings D.I.Y.

How to seal and waterproof concrete and CMU blocks with Liquid Rubber Membrane coatings.
Materials used:

Duck Coat DrySeal Premium Rubberized Foundation Coating is an elastomeric polymer modified asphalt emulsion designed for coating concrete foundations. This product dries black and protects concrete foundations from moisture and water intrusion. This is the approved primer with self-adhered foundation membranes.

SealBest® GrayShield™ Foundation Coating is an acrylic elastomeric emulsion fortified with water-resistant polymers. GrayShield™ forms a liquid rubber membrane that seals and waterproofs a variety of surfaces. GrayShield™ UV resistance, water resistance, and natural gray color allows for use below grade, as well as above grade on surfaces that are exposed to weather.

Music:

[ripadipaflipa]

Great post! I’ve been hunting around for an option to seal my homes foundation b 4 applying paint then putting back the sand fill that I had 2 remove to get to the foundation slab and exterior wall. So far the best if about 30 posts on YouTube.
Thanks!

[tomwright]

very helpful - thanks. You should be a teacher the way that you explain things step by step and clearly!

[CancinoProperties]

Great video I have been looking for this type of nformative easy to understand content for a while now much appreciated.

[gopinathdas]

Excellent video !
I was searching for such a information !!
Thxs !!!😊

[brady]

still gobbling up the series man, awesome format / presentation

[zekegendill]

really enjoying your videos and how informative/educational they are. keep it up!

[Andrey-bsqm]

Thanks a lot man! Exellent info and great skills!!!

[COisfake]

I was looking at a new house to buy. Basement leaks. I went to a job site where they were pouring new foundations. 😑. No exterior sealant.

[baba-smfm]

Great video! I need to hire a contractor to get a room addition built but I am not sure if it will be cheaper to get a block or poured foundation. I have been told is more labor intensive and more expensive to get blocks, but then someone else told me the opposite. Not being in the trade I am not sure

[lindagreer]

Thank you for this. I bought a 1940 home that has a concrete block back wall that is completely bare- and had a couple cracks. How would you recommend sealing the cracks? Thanks again.

[sumairsaeed]

Can we do plaster after coating or brushing the water resist coat chemical processes that you did sir

[campgoerOne]

What do you suggest for chipping concrete driveway. I had a patio and driveway poured about 6 years ago and in the process of drying it cracked. And now I'm getting chipping in the driveway. This is in the Midwest. Thanks!

[Papastomper]

Do you have any experience with wood foundations? Or suggestions on where to look for advice with sealing a wood foundation

[samuelreddy]

With just a layer of paint, you will get water leakage after a couple of years. No matter how good the paint is, just the paint alone is not enough, as the wall cracks over time.

[JacanaProductions]

I've got a 2ft retaining wall in our front yard that will be holding back some dirt, would this be overkill? The other side of the wall may be tiled in the future so I worry that the moisture from the soil on the other side may leach through and ruin the tile after some time. Cheaper solutions.

[mohammadsayim]

Can you please suggest the existing walls probably for the basement where the exterior walls are filled with soil, if seepage occurs at that region that is already built ?

[sherimatukonis]

What about under the floor and exterior seem between the walls and floor

[AyiviTV]

Nice! Waterproofings are very interesting. There are many different ways to get them done. Just completed mine.

After this video, feel free to take a look.
Thanks for sharing.

[bigmonkey]

How long did you wait from the block wall being constructed? I've heard 28 days is what's needed.

[jeremyjames]

Can these products be used on exterior brick walls?