Honda Rubicon 520 & Warn VRX Winch Install

Warn mounting bracket and VRX 25 winch on a 2022 Honda Rubicon 520.
Just figuring it out along the way...

[rnrudynh]

Reading the directions helped me alot when I stalling the winch on my son's 250 recon. The blue, yellow wires were too short and the red, black wires from warn were to long so I swapped them.

[Drrob]

The solenoid goes under the gas tank, using a ubolt type of mount to one of the frame tubes going down

[Shadowa]

You know there is a sub harness for the hand grips and winch on that model yeah?

[dyland]

How did you splice the 12v connection? Did you use a sub harness

[brettkoch]

What is the brand and part # for the winch mount you used?

[bm]

Did you have to trim the plastic at all for the winch to fit. Others have mentioned that trimming is required with the kfi mount. Just curious.

[tylerm]

Did the winch come with the switch and everything needed? Besides the mounting plate.

[JohnDoe-dkzz]

Can you link the winch mount and the winch from Fortnine website ?

[andrewcurtis]

I must have missed how you mounted the solenoid. Zip ties?

[bobbybest]

How many pound winches is that? is that enough if this vehicle gets buried

[handymike]

I cannot believe you drilled the frame. 😖

[rnrudynh]

Holy shit you just voided your warranty by drilling through the frame. 3-4" from the hot exhaust..?? Yikes. Good luck

[vantbo]

Bad move on the holes in the frame. Storage area would have been better