Converting to XD Drivers

This video shows the basics of converting a standard 9 and 10 speed freehub body to a 11 and 12 speed compatible XD driver.

Sram's XD drivers provide a better range than standard cassettes, and offer a better shift thanks to their advanced manufacturing technology.

For full instructions, head here:

[jsuarezvisuals]

Having trouble finding out what kind of hub my 2020 giant talon 3 has . The specs say QR free ball. So makes it hard to figure out what XD drive to get .

[alantaylor]

So would I be right in saying that if I got a wheel with DT Swiss hubs, that these hubs will be able to accept a SRAM XD Driver or the OneUp MiniDriver? If I'm wanting to keep my 11-speed setup but convert from 11-tooth cog to 10 or 9-tooth cog, I should be looking for a wheel with DT Swiss hubs? Is that correct?

I have an endurance disc road bike and am converting it to mtb gearing. I have all angles sorted except for the hub issue. I currently have 700c wheels but am planning to convert to either 650b or 26 inch wheels. So if I do that conversion, I must make sure I get hubs that will allow me to use a 9 or 10-tooth cog.

Actually I just thought, instead of getting wheels with DT Swiss hubs and converting to a Driver hub myself, maybe I could just get a wheel that already has the XD Driver installed. Is that a good idea?

[johnvmtb]

Thanks for sharing, now I know how too swap my freehub body

[camilosatiro]

Mine is Shimano fh-rm35 can I put xd to use sram xx1?

[BorgyManotoyOnline]

I am looking for a hub (cheaper than dt swiss), that I can use temporarily with shimano 10 cassette (ordered parts arrived but my hubs are not compatible with the cassette)... later, I will be upgrading to 1x12s and the cassette I am planning to get needs XD. Any hub recommendation (cheaper than dt swiss) that I can use how for 10s and I can replace or change to XD driver without completely replacing the hubs? Thanks :) --> Sorry I am really noob with biking

[gamingking]

1.Can I upgrade free hub from my Specialized Axis 1.0 rear wheel with 10 speed 11-32T Shimano cassette to Sram XD free hub @t and this cassette @t
2. If above is not possible can use this 11 speed cassette @t on my 10 speed Axis 1.0 wheel?

[davidmullikin]

I have gravity hubs by Formula. Will these hubs convert to XD?

[poopergubben]

Can i fit an XD driver on a Shimano FH-M618 rear hub?

[thesomeoner]

Will this upgrade fit to the same frame?
I'm having trouble understanding how my new 12 speed cassette is going to fit on the rear wheel

[airbrush]

I have xd and I need it convert to shimano slx.... how I can do this????

[adrianiiacedillo]

Sir, Giant tracker performance, boost 12x148 sealed bearing can covert to xd drive?

[christosmanoli]

I have some questions and it would be much appreciated if someone would answer. I have an old giant aluxx 6000 series mountain bike. It has an 8 speed cassette and three chainrings in the front. What type of freehub do I have? Will I be able to convert it to an XD freehub? Will I need new wheels or something like that? Please answer.

[harisantoso]

Hi just looking around youtube and find this. I have Stumjumper FSR comp 27.5 with wheels Roval 650b, alloy, 29mm inner width, 28H and Hub Specialized, Hi Lo disc, 4x sealed cartridge bearings, 12mm thru-axle, 28h. Can I use this to upgrade hub for 11/12 speed? Thanks.