Genius Solution For Swiss Lathe

[WLS_Churchill]

God i love technology ! Imagine how machinist from 1960 would feel in a modern shop with these incredible tools we have !

[samuelmartin]

WAIT, I KNOW THIS ONE;
that time when America was flexing and sent Japan a tiny drill bit, Japan drilled a hole through it an sent it back 😅

[thebloxxer]

Did I hear the TF2 Engineer's nope in this short?

[michelbrasseur]

Was it cnc machine video or a documentary about horse breeding ?

[danielfernandesdasilva.]

With internal cleaning under pressure, the material comes out, cools and makes a clean cut without breaking the tool. I'm not going to talk about the variables because I would spend hours talking about😂

[QurttoRco]

Wow a blocked off collet ? Where did you get such advanced tooling ?

For real though shouldnt you turn on ttc on small ones like this only when the drill is in material ?

[peterkovacs]

We're trying to avoid fasten the collet-nut in the machine by driven tools. If not possible, then at least with 2 keys.

[yerbeilisready]

Just had some real hard time making a 30 inch carbon tube with .750 hole .125 wall out of 1 1/2 inch solid stock. Never seen you guys do any carbon. Not carbon steel, graphite, used for pyrometers in a furnace.

[steffelsnake]

In messing ist ja lachhaft nehmt Werkzeustahl 😢

[Имя-к]

Латунь- не серьезно, попробуйте 15-15CL

[ShazbotDesign]

It's cutting what looks like Copper or Brass. Butter compared stainless.

[kimwollmann]

Deep hole drilling with a ER collet. Why would you put a tool thats worth 15 times the toolholder into action smh. For standarized shanks use metallic sealed presicion collets at least

[ProphetofBauu]

Yeah it's a coolant through drill. Is that rare??

[cataca]

well do not engage with parts that requires long series, because hollow drill or not it will break at some point, and most of the time theyre used in very specific cases, which renders them financially non viable and a total waste of money

[Brearius]

Латунь сверлит и радуется что сверло не сломал 😂😂 это из разряда отрезать мягкое масло ножом и радоваться что нож остался целым 🤣🤣🤣

[Zxavioure]

Yup. I see it daily “machinists” not using a sealed collet for though spindle coolant because they are lazy and the drill walks, breaks and they scrap a high dollar part. 🤦🏽‍♂️

[joeburky]

drilling 12 inches deep in steel with one of those in 5 seconds is stressfull every time.

[nogum]

please tell me you entered the hole in reverse

[owenadair]

At this point, couldnt you just make that piece instead of buying one??