Nitro Engine Powered 3D Printed RC Airplane. Full Build. DIY RC Airplane.

Показать описание

Can the LW-PLA 3D printed designed for electric motor be used with an RC model airplane nitro engine?

The original design is a rear wheeled and electric powered model airplane.. I upgraded for nitro engine and nose wheel.

CG: 65mm (From the wing leading edge)

Thanks for watching. If you want to support my channel, join.

Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos.

#rcairplanes
#modelairplane
#rcnitromodel

Рекомендации по теме

Комментарии

Well done …nitroengine is a plus in this hobby!

joseluissanzcamara

from start to finish, faultless, bravo,

sickssix

*( MASTER LAYANGAN )* IKUT NYIMAK TUTORIAL PESAWAT RC. 🙏👍👍👍👍

masterlayangan

Amazing! Love the design engineering. I built a 3D printed Ercoupe. It was so thin and fragile. It flew okay on the maiden, but when I came in to land I was offside of the runway and hit a weed. The model crumbled. That was my first and last 3D printed airplane.

xKmotx

Building the old fashion balsa and plywood kits is more relaxing and rewarding...best engine ever was the OS 40 unbeatable and last for years

redbluerc

You are great
You are humble
You are Miracle
You are Made For Planes
You are My

InformationAboutFlyingObjects

It might be a good idea to put foam around the tank so as to mitigate the possibility for fuel to foam up.

breandanh

It would seem that this plane would be very nose heavy with the engine and everything at the front. What’s the Center of gravity. Great video but leaves a few of the steps out

karenleaboyd

Great video and model. I can't seem to find the link to purchase this plane. What is the name of this plane and where can I download it?

edwardlopuski

Salamun alaykum! Qardashim Uzbekistandan salamlar olsun.Tashakkurlar sana.Allah ishigni ummat foydasiga qilsin. Amin.

Владимир-езю

Hocam yine döktürmüşsünüz, printer baskı süreleri uzun olmasa cidden güzel seçenek. Hocam ileride zagi tarzı uçak yapmayı düşünüyor musunuz.

serdar-bayram

That's a neat idea, takes scratch built to another level. Im curious to see how the plastic will hold up to model engine fuel and exhaust over a period of time.

Gavs_rc_hobbies

Cool video!! Love your work! My only two things that I saw were 1) I loathe grub screws on main control surfaces, e.g- Elevator and Ailerons. I know some people swear by them but that is just my opinion. 2) Slightly heavier bands holding the wings on. And always put more on than you think it needs.

Mgp-Rc