Jeep Wrangler TJ Rough Country 4' X-Series Lift Kit w/ Shocks (1997-2006) Review & Install

Item J10483
----------------------------------------------------------------
Give ExtremeTerrain a follow for the latest Jeep Wrangler news, videos, pictures and content!

#wrangler #roughcountry #lift

[Oncebitten]

The shock piston shaft has a hex cut at the top for holding while tightening the nut. DO NOT USE VICE GRIPS OR PLIERS ON THE SHAFT. Damage to the shaft will cut the dirt seal.

[dremyofit]

Added this kit, vibration started in ride so needed to add Rugged Ridge NP231 Transfer case SYE kit and new rough country CV rear driveshaft to fit the 4 inch left THEN went ahead replaced front Driveshaft heavy duty $eris 1310 CV with grease able u-joints and Rough Country transfer case drop kit for 4 to 6 inch lift! Overall a very nice look on 35 tires. Rough Country is for a person who won't be wheeling seriously and just wants a great aggressive look. My 2001 Sahara never looked so good!

[artactical]

This exact same lift I ordered didn't come with any instructions in any of the boxes the lift came in. Glad this video was done.

[jlateralus]

This video makes me think I can do this myself, but nightmares of rusty/broken bolts makes me think otherwise 😂

[wisetow]

That was so easy. I’m going to get my wife to throw one on our jeep tomorrow after dinner real quick.

[cotilla]

Thanks for the information, I ready by the kit for my Jeep 1997.

[maintenance]

What was the Rear Upper Control Arms measurements? I didn't see it in the video?

[BladeDreams]

Thank you very informative and detailed ! : )

[jameswethington]

Would brake line extensions be required with this lift kit. Great video thanks

[Super_overland]

Just finished installing this and the instructions were garbage. I installed there 2.5 inch lift with the x series control arms. The pre alignment were way off had series vibrations on the way to the alignment shop. After watching this video they specified the same pre alignment measurement for my 2.5 lift as the 4 inch lift you installed which doesn’t make sense.

Also one of the boxes where damaged and was missing the track bar bracket just received it Friday after waiting 10 days for it. Lost two weekends of wheeling.

[jamessid]

The music's great and all but so loud it gets annoying after a while

[briananderson]

Could you plug weld instead of drilling and bolting?

[LamontBoucherville]

Hi Extreme this work on the TJ unlimited aka jeep LJ?

[kkim]

Just bought this. but i'm going to slap 37 inch tires on it

[cotilla]

What tire and wheels you can recommend for this lifting?

[Loader]

Please learn to use an adjustable wrench correctly before you get hurt. Never put the pressure on the adjustable jaw. I’m half way through your video and you’ve use the wrench the wrong way consistently. When you have the pressure on the adjustable jaw, the weakest part of the wrench, and it pops, you will be looking at busted knuckles at a minimum. We were drilled about this over and over in school!

[michaelmack]

what is the measurement for the upper rear control arm ??

[Lees]

Would rather pay someone to install. Way over my mechanical skills.