filmov
tv
Orthogonal Metal Cutting examples | Energy Required for Metal Cutting
Показать описание
In an orthogonal metal cutting operation depth of cut t1=0.13 mm, VC=120 m/min, α=10 degree and the width of cut = 6mm. It is observed that chip thickness tc=0.23mm, Fc=500N and Ft=200N. Calculate the percentage of the total energy that goes into overcoming friction at the tool chip interface.
0:11:17
Metal cutting solved example problem | orthogonal metal cutting examples
0:11:06
Orthogonal Metal Cutting examples | Energy Required for Metal Cutting
0:00:15
Orthogonal cutting in electronic microscope
0:11:22
Orthogonal Metal Cutting Solved Example Problem | Metal Cutting Calculations
0:00:10
Cutting Mechanism
0:01:36
Orthogonal Cutting Vs Oblique Cutting
0:08:11
Orthogonal Metal Cutting Solved Example problem | Shear plane angle, Friction angle, Resultant force
0:02:15
Understanding Cutting Tool Geometry
0:00:19
Temperature analysis of an Abaqus based orthogonal cutting model for Nickel alloys (INCONEL)
0:00:16
THIS is why machining is so impressive! 🤯
0:07:22
Explain Orthogonal and Oblique Cutting | Difference Between Orthogonal and Oblique Cutting
0:05:56
Orthogonal Cutting Vs Oblique Cutting (Metal Cutting) Production Technology
0:00:10
orthogonal Metal Cutting (Machining) using Abaqus.
0:00:08
Bar oblique cutting and drilling- Good tools and machinery make work easy
1:40:13
L-7 | Metal Cutting by Gaurav Babu | GATE | ESE | SSC JE | RRB JE | GB Lions #manufacturing
0:07:06
Introduction to Mechanics of Orthogonal Cutting - Metal Cutting Theory and Dynamometry
0:00:15
orthogonal cutting using Abaqus
0:06:59
Analysis of Orthogonal Machining | Metal Cutting Operation | GATE Production Engineering | GATE ME
0:00:16
Different between orthogonal and oblique machining process . Gate b tech M tech . UPSC . RRB JE
0:00:06
Merchant's Circle in Metal Cutting #shorts
0:14:43
cutting forces in orthogonal cutting | Merchant 's Circle force analysis | Metal Cutting Analys...
0:07:05
Introduction to Orthogonal and Oblique Cutting - Metal Cutting Theory and Dynamometry
0:16:14
Orthogonal and Oblique Cutting | Metal Cutting Operation | GATE Production Engineering | GATE ME
0:11:02
3 Orthogonal and Oblique cutting
Комментарии