How to make and Use Wire Burning Tool for Woodturners. #woodturning, #wood turning.

How to make a Use Wire Burning Tool for Woodturners. I will walk you through the process of making a Wire Burning Tool and then show you how to use it to enhance your woodturnings.
Wire Burning Kit for Woodturners.

Website
Facebook
Instagram


The following links are affiliate links to items that I use in my shop.
Any potential purchasing or even clicking on these links will help support the channel
Making it possible for me to continue to create more content for you.
Many of these items you have seen in use in the videos.

SAFETY

Tools I use

CHUCKS AND MOUNTING

SHARPENING

FINISHES

ADHESIVES

SUPPLIES
BOOKS

Video Recording Gear

[shastastan]

After years of turning, I decided to give burned slots a try. Your video was just what I needed to see. Many thanks!

[Sidswoodworkingprojects]

I like the ball idea. I use bailing wire for bigger lines, and left over wire from my mig welder for smaller lines. TTFN Sid.

[patrickgibbons]

Another useful tool. Thanks for posting this.

[emgiwoodworks]

You can use dowels like you show here. I've made wooden balls of about 1 1/4 inch in diameter. The wire is fixed with a through-hole and another hole drilled close to it half the depth where you stick the end of the wire in. They provide a good hold and in case of an emergency they slip easily from your fingers. Still haven made a video about that so thnx for reminding me!

[gregdagg]

Thank you, thinking Dollar store picture hanging wire might be a good sub for the primo guitar wire..Blessings

[theRussianJiu]

What is the gauge you use on small turnings?

[zetuskid]

Dean, I’ve heard several people say they use guitar strings as well as cable wire of old bicycle brakes. I was wondering if you know the correct term they call the little ends crimped at the ends of stainless wire(like on bicycle brakes). The wire is real tough to bend and I thought after putting the wire through the wooden handle you could crimp one one the end.
Thanks